Go Bottom

Shibaura SL1603

View my Photos
raptorman
Join Date: May 2010
Posts: 3 south carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-05-22          171003


I have a SL 1603 starts hard have checked glow plugs seem to be heating up Ok any suggestions. Also where is data plate located with serial number?? How can I tell if this is a remanufactured machine it says 43 hours on meter and looks fairly new. I cant find any data on machine. Anyone that can help I would appreciate. Thanks Pete



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Shibaura SL1603

View my Photos
bradsbuick85
Join Date: May 2010
Posts: 10 kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-05-31          171240


Could be the feul pump bleeding off,or the fuel filter clogged,does it start ok when warm? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Shibaura SL1603

View my Photos
raptorman
Join Date: May 2010
Posts: 3 south carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-05-31          171243


Yes warm start no problem Thanks ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Shibaura SL1603

View my Photos
Paratrooper
Join Date: Mar 2006
Posts: 8 Kingman AZ
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-06-04          171325


There is a small circle on the right hand side of the dash with a squiggly wire about a half an inch down inside of it . It is a "shunt" from the glow plugs . When it glows bright red it's time to start . If it does not glow then the plugs have a problem .I have the same machine . It is the same as the Ford 1210 . ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login