Go Bottom

hydraulic filter placement

View my Photos
chevy2
Join Date: Sep 2010
Posts: 2 Edmonton Alberta Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-09-20          174110


My father has a mitrsubishi 180 D tractor but has lost the manuals. I am in the process of replaceng them. We would like to replace the hydraulic filter but we are not sure where it is. any drawings would be appreciated thanks.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hydraulic filter placement

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-09-21          174114


Only going by Yanmars. External spin-ons are large and obvious but smaller models don't have one. All do have an internal mesh that you remove, clean, put back. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hydraulic filter placement

View my Photos
kwindle
Join Date: Mar 2009
Posts: 6 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-10-01          174301


On my Mitsubishi FD2650, the mesh filter can be accessed through a twist off plug on top of the transmission housing. There are two twist off plugs...it's the one on the left side (if you're sitting on the tractor). Unscrew this cap, pull out the filter, clean, and replace. It's about 10-12" long. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login