Go Bottom

Need help for Mitsubishi K3A hard starting

View my Photos
sparetime
Join Date: Mar 2010
Posts: 6 Girardville Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-03-21          169419


I just bought a Bolens Diesel H1502 Hydro with 662 hours on it with a Mitsubishi 3 cylinder in it . It sat for 2 years because it was hard to start . He told me he used starting fluid to start it . Once it is warm it starts right up without either . I replaced the glow plugs , flushed out the fuel tank , replaced fuel supply lines . But that did not fix the hard starting . I think it is dropping the fuel from the system but not sure ... Has anyone had this problem or know how I can fix it let me know ? I would hate to waste the 150 I paid for it with all the 3 point attachments . Thanks , Dean .



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-03-30          169638


Ether can damage heads. The engine's and the operator's. But I'll give you $151 for it anyway. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
sparetime
Join Date: Mar 2010
Posts: 6 Girardville Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-03-30          169643


No thanks on the 151 . The previous owner told me the only way he could start it was to use either . He didnt use it much but damage was done . I will get it to start the way it should or it will be on Ebay . ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login