Go Bottom

d2350 hydraulic lift

View my Photos
hoveye
Join Date: Nov 2008
Posts: 3 Pickens s.c.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-11-19          158029


hydraulic lift will not lift at all, just stop working any help.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



d2350 hydraulic lift

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-11-20          158035


If you want help, then you need to be a lot more specific than "stopped working".

Tell us everything we need to know in order to give you accurate, quality replies: how old it is; what you were doing when it stopped; how long ago; what you have done to remedy this yourself if anything; what your skill level is if you have to repair it; if you checked the simple things like checking fluid level, looked for leaks, etc. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



d2350 hydraulic lift

View my Photos
hoveye
Join Date: Nov 2008
Posts: 3 Pickens s.c.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-11-20          158047


It is a Mitisubishi 79-80 model, D2350. The hydraulic lift does not lift. It stopped last week when I changed from the bushhog to the plow. I changed the hydraulic fluid, checked for leaks, cleaned the filter. My skill level is pretty high. I purchased a manual for this model but did not find information to help fix it. Do you need other information ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



d2350 hydraulic lift

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-11-20          158049


You don't say so but I'm assuming by 'hydraulic lift' you mean the 3pth and not the loader or some other hydraulics.

Is it possible that somebody (or a kid) was fiddling with the machine and turned the control knob that adjusts the speed at which the 3pth lowers? If it's turned all the way closed it will stop all flow in & out of the 3pth lift / lower cylinder.

Also, a remote port or FEL valve stuck in the open position will cause the relief valve to open and dump all pressure.

Best of luck. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login