2460 DTC Wont Start
Alan T Dossett
Join Date: Posts: 1 |
2004-09-03 95549
I have 2460 would not start (cranks fine). Started it with starting fluid today mowed for 4 hrs ran perfect. Turned it off then would not restart. Suggestions?
Reply to | Quote Reply | Add Photo
2460 DTC Wont Start
loghouse95
Join Date: Jul 2003 Posts: 87 missouri |
2004-09-04 95557
Wish I could tell you what to do, there are several reasons it might not start but DO NOT use starting fluid. ....
Reply to | Quote Reply | Add Photo
2460 DTC Wont Start
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2004-09-04 95559
Diesels need only fuel, air and compression to run but the starter has to spin them fast enough to generate initial heat and pre-heaters should work. Starter fluid can do serious damage. Compression releases on some engines have to be closed.
I'd start with the pre-heaters and electrical in this case (battery condition and clean the terminals and engine end of the ground). Then, I'd check for good fuel flow from the tank and delivery from the injectors. Then, check the valve clearances and a compression test if necessary. ....
Reply to | Quote Reply | Add Photo
2460 DTC Wont Start
bobdear
Join Date: Jul 2003 Posts: 9 viroqua wis. |
2004-09-18 96771
SOUNDS LIKE YOU HAVE A FUEL PROBLEM.CHECK FUEL FILTERS FIRST.IHAD ONE WITH SAME PROBLEM AND I HAD TO REBUILD THE INJECTOR PUMP.DONT USE EITHER! THANKS BOB ....
Reply to | Quote Reply | Add Photo
Go Top
Share This