Go BottomLoader plans from cad corp
 | Steve Coventry
Join Date: Posts: 1 
|
2000-12-15 22496
Has anyone consturted a loader from their plans. If so how does it work. thanks SEC
Reply to |
Quote Reply |
Add PhotoLoader plans from cad corp
| Craig
Join Date: Posts: 1
|
2000-12-16 22530
I have not built a loader from their plans but I did purchase a set of backhoe plans from them and can attest to the quality of the plans. It was my intention to build a backhoe directly from the plans but shortly after I purchased them I lucked upon a rusted out 3 point ford backhoe that needed complete rebuilding. The CAD plan instructions are very thorough and still leave enough custom planning if you have different cylinders or material available. There were numerous times while rebuilding the Ford backhoe that I referred to the CAD plans for reassurance that the longer booms and tubing I was using was of sufficient strength. (I greatly increased the capability of the original backhoe with a longer main and ext boom and bigger cylinders.) If you consider yourself a fair welder and have a means of cutting 4 in tubing and 1/2 inch steel then go for the cad plans and have a good time. I would say that his estimates on time and material are very realistic. ....
Reply to |
Quote Reply |
Add PhotoLoader plans from cad corp
| KenB
Join Date: Posts: 1
|
2000-12-18 22562
See the link below for a good description of one person's experience building a CADdigger.
....
Link: CADdigger Construction
Reply to |
Quote Reply |
Add PhotoLoader plans from cad corp
| Steve Coventry
Join Date: Posts: 1
|
2000-12-18 22594
Thanks for the reply.The Cad digger looks really nice. thanks Steve ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This