Michigan 55B Loader
BroDeCo
Join Date: May 2005 Posts: 2 Keene NH |
2005-05-05 110727
I have been working on this loader for some time now. I can seem to figuer out the brakes they don't work at all. The brakes are Air over Hydrolic. I have hooked up an out side air supply to fill the tanks with air, while the air is hooked up it leaks out of the treadle valve which is attached to the brake pedal. When the pedal is pushed down the air is held up in the treadle valve and does not leak but when I let up on the brake it contiues to leak. I don't know if maybe some how the hoses were hooked up in correctly when i got the machine or what. If anyone knows anything about this piece of equitment or this spicific problem please let me know how to fix it or where i can find help. Thanks a Lot
Reply to | Quote Reply | Add Photo
Michigan 55B Loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-05-06 110747
Put new seals in the treadle petal. They normally do go bad in the neutral position. ....
Reply to | Quote Reply | Add Photo
Michigan 55B Loader
BroDeCo
Join Date: May 2005 Posts: 2 Keene NH |
2005-05-06 110770
thanks but the whole pedel is new and was just put in yesterday and there was no change...so if you think of anything else let me know thanks
....
Reply to | Quote Reply | Add Photo
Michigan 55B Loader
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2005-05-06 110772
Are you sure it is leaking out ?
If the air supply, compressor or whatever it is, is supplying the brake system with air pressure in excess of the relief valve setting on the machine, the relief valve will open in an attempt to dump the excess air pressure.
Could this be what is happening?
Best of luck. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This