Go Bottom

Sheeting on exterior walls

View my Photos
Fireman
Join Date: Sep 2004
Posts: 0 Kansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2002-11-11          44878


What is a good exterior sheeting to use during framing. I don't really like OSB. I have heard of a product, I believe is called Built-rite??????(not sure) it is supposed to "breathe". Any suggestions.

Thanks




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
Peters
Join Date: Feb 2002
Posts: 3034 Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2002-11-11          44882


I have not seen anything called build-right. I am using 1/2" exterior grade plywood, like you I would like the greater strength for the wall. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
tzgary
Join Date: Apr 2005
Posts: 1 NC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-04-30          110541


I agree with Peters. You can't go wrong with 1/2" ply. sheathing. Any R value lost is more than made up by added structural strength (if attached correctly). I will admit that sometimes I will use OSB as wall fill with plywood on the corners, but I also like to cut in diagonal bracing on exterior walls even with solid sheathing. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
AnnBrush
Join Date: Mar 2004
Posts: 463 Troy OH
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-05-01          110593


IMO added structural strength cannot make up for lost R value - R value lost, is heat or cooloing that will be lost every year on increased bills. I assume OSB is strong enough, therefore the only noticible difference will be a structure that transfers heat more readily. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
havoctec
Join Date: Sep 2004
Posts: 56 Minnesota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-05-02          110603


Built rite is a low density fiber board that has virtually no structural value. If you use built rite you will need to put in steel diagnal bracing between the built rite and the studs. You should also put plywood or osb in the corners. The only advantage to built rite is a little more r value but I would at other material for that purpose.

What do you have against osb? The manufacurers claim it is stronger than plywood. I'm not sure I believe that but it certainly has enough structural integrity for wall sheeting. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-05-03          110657


Lots of us "Old School" people had a hard time converting to OSB, but so far I haven't herd of a house falling down because it was used. Our house is built using it, I drug my feet a bit but as allways the cost factor entered the picture. Plywood is costly now, but if no body used OSB and all insisted on plywood what would it cost with that much less competition and lots more demand? Just my ramblings. Frank. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
brokenarrow
Join Date: Jan 2004
Posts: 1288 Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-07-12          113379


Just to bring up an old subject (we talked extensively on this before) We have a new subdivision going up out here. Once again! Since we talked last on this subject I have been watching all new construction around here. Most low end houses LOL ($250K) are built with the osb on the corners and around the windows and the insulation type board on the rest of the walls. OSB is on all the roofs!
The higher end houses all seem to have osb 100% around and on top of the houses with only a few with Plywood on the roofs.
Was thinking that maybe this is a locational building practice because I see many of you scauffing at osb.
I would not think twice about osb, infact I am leaning more toward osb than any plywood lately especially if it is 16" ioc. I have osb on the roof of my garage I built 2 summers ago. Plywood on my vacation homes roof I built in 2001. I have 2 small waves in the house roof and the garages is perfect. If I would of gone with a thicker ply for the house I would not of had that problem I think although the waves are very small and hard to notice, I still DO notice it. They are between 2 of the roof trusses.
IMO Whatever you use Ply or OSB just buy a quality sheet and dont cheap out on the thickness and you should be happy with either. Like I said before I do think it is a "regional thing" on what is used because around here in Southern Wis. osb is used almost exclusively. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-07-12          113381


We have 7/8" Gold Edge Seal OSB subfloors and had a sink overflow in the laundry room. The cut edges of the OSB have swelled up some and telegraphed through the linoleum. I would only use OSB in an area where there is absolutely no way for it to get wet. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-07-22          113796


Here is SE Michigan we use OSB almost exclusively---roofs, walls and floors. Plywood is used on some commercial builds where fire break/resistance is required like on a townhouse or apartment. Around hear OSB costs the same as plywood. My neighbor's new $450K house uses a fairly new OSB product on the floors that is literally waterproof. He left it uncovered (no roof) all through the winter and spring and there was not even a joint that swelled---not even where the screws are. Made a believer out of me. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
paulss
Join Date: Nov 2003
Posts: 60 Lavaca County, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-07-23          113803


I know HardiPlank makes 4X8 sheets for exterior use, does anyone know if they make something to be used as an underlayment? It would seem to be bulletproof with the possible exception of the weight factor. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
grinder
Join Date: Oct 2003
Posts: 677 central Maine
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-07-27          113971


earthwrks
Do you know the name of that product? I have yet to use an OSB that hasn't swelled on the joints that have been cut.
Most vinyl flooring products are not warrantied over it.
(IMHO)
As far as plywood is concerned 1/2" 5 ply fir(not 4 ply pine) on the walls and 5/8" on roofs never creates a problem. "16" oc " of course. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-07-27          113979


grinder: I will be visting soon the guy that used it--I'll keep in touch. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sheeting on exterior walls

View my Photos
091755
Join Date: Jun 2004
Posts: 143 brantwood wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-08-26          115499


Fireman

I am not sure where you live or what you are building, but
I have used 'roughcut' 1by10's and 12's, that were cut out
of balsam and spruce. My neighbor has an old type sawmill
and I help him cut the stuff. It makes a nice wall material
and roof material for garages. I have built two-24by40
sheds with it. I am lucky to have access to this and I
have been using 12 and 16 footers, so it lines up with the
studs and trusses. You may want to look for someone who
runs a small sawmill in your area. It might be worth the
try. It takes a little longer to put up, but it is
stronger, tighter, and warmer than any plywood or OSB.

doc ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login