Duerr 5 Hp 655 Chipper blade bolts: Wood Chippers 3PH  -- Tractor Attachments Implements 3ph Discussion Forum and Review Duerr 5 Hp 655 Chipper blade bolts: Wood Chippers 3PH -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Wood Chippers 3PH Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 06-22-2007, 10:02 Post: 143122
NE_GUY



Join Date: Jun 2007
Location: New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 8

3
Filter by User
 Duerr 5 Hp 655 Chipper blade bolts

I need at least 3 or more of the bolts for the blades. They seized and had to be drilled out to get the blades off.So Sad






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-22-2007, 10:28 Post: 143123
randywatson

TP Contributor

Join Date: Apr 2007
Location: texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 109
 Duerr 5 Hp 655 Chipper blade bolts

if drilled out, did you have to retap threads? if so you should be able to buy hardened bolts locally,

for installing use anti seize compound, purchased at auto supply, will keep future bolts from seizing to avoid problem






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-22-2007, 14:13 Post: 143125
NE_GUY



Join Date: Jun 2007
Location: New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 8

3
Filter by User
 Duerr 5 Hp 655 Chipper blade bolts

I'm open to anything. One place couldn;t get them out so I found a place that did. I don't think the threads are damaged and weren't retapped/rethreaded. I went back to the 1st palace to see if they had bolts. The bolt head is round and countersunk into the blade and accepts a hex wrench, again for purpose. The 1st place had DR bolts but too short. I could use longer and trim them to length if I find them. Or, if I find a bolt that has a different thread but long enough I could tap/thread. Not sure anything there is hardened and maybe not able to be tapped etc. The original bolts would be nice. Thanks for the help. Respond anytime as I can use any help.Smile






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-22-2007, 15:12 Post: 143126
Murf

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 1999
Location: Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7009
 Duerr 5 Hp 655 Chipper blade bolts

Just measure up what you have (or take it with you) and go to any good fastner supplier. Any major town has at least one.

What you are looking for is called a "grade 5 socket cap screw" and will be further described by it's diameter and length, i.e. 5/8" x 2".

There is such a wide variety of stuff available I can't believe you won't find what you need fairly locally. In fact you can usually find stuff like that in the bulk nuts & bolts at your local building center. Just be sure you are getting grade 5 hardware.

Best of luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-23-2007, 10:36 Post: 143138
NE_GUY



Join Date: Jun 2007
Location: New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 8

3
Filter by User
 Duerr 5 Hp 655 Chipper blade bolts

Thought I was in a real bind on this. This forum gives me hope. Thanks for this info. I will look at fastner suppliers and since the bolts would have been produced in bulk I would think they are out there. I would never have known about the grade etc. Thanks again.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Wood Chippers 3PH Forum

Thread 143122 Filter by Poster:
Murf 1 | NE_GUY 3 | randywatson 1 |




Most Viewed

+ Duerr hp/678 Chipper replacement blades
+ Jinma chipper review
+ Disk vs. Drum vs. Cone Head wood chipper Review
+ Duerr hp/678 Chipper Manual
+ PTO woodchippers (again)
+ New Jinma JM6 Chipper
+ Jinma manual or parts list
+ Used Brush Bandit 150 12
+ Speeco Log Splitter Q
+ PTO chipper for John Deere JD 5303

Most Discussion

+ Duerr hp/678 Chipper replaceme
+ Jinma chipper review
+ PTO woodchippers (again)
+ Duerr hp/678 Chipper Manual
+ Used Brush Bandit 150 12
+ New Jinma JM6 Chipper
+ Speeco Log Splitter Q
+ Who Makes the Best Chipper Per
+ Fresh branches with leaves (ch
+ Chippers again

Newest Topics

+ SandR Pro Chip
+ olathe wood chipper model 12 operator manual
+ 8N Digging with a Middle Buster
+ Duerr 678 rotor assy removal
+ Duerr Chipper Manual
+ Jinma 6 Wood Chipper
+ Flywheel shaft adjustment
+ Duerr hp/678 Chipper Manual
+ Mackissic TPH-184
+ Mackissic chipper/shredder info













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines