Replace seals on NH7308 bucket cylinder?????: Loaders  -- Tractor Attachments Implements 3ph Discussion Forum and Review Replace seals on NH7308 bucket cylinder?????: Loaders -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-30-2004, 13:18 Post: 94982
choltz



Join Date: Aug 2004
Location: Houston, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

2
Filter by User
 Replace seals on NH7308 bucket cylinder?????

Does anyone know how to get the bucket cylinder on a NH 7308 loader apart to replace the seals? I've got the kit and an exploded diagram, but apparently NH doesn't have a service manual for the 7308. The outer nut on the cylinder doesn't screw into the casing, it screws onto the "cylinder head" inside. I can't figure out how to hold the cylinder head in order to remove the nut (which conceals a snap ring). Please reply short (I haven't paid the money to read "long messages", or reply directly to me at choltz_at_orbitworld.net. Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-30-2004, 18:27 Post: 95004
oneace

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Mar 2004
Location: south central pa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1490

2
Filter by User
 Replace seals on NH7308 bucket cylinder?????

There is a retaning ring that needs to be pulled out in order to remove the cap.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-31-2004, 09:07 Post: 95054
choltz



Join Date: Aug 2004
Location: Houston, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

2
Filter by User
 Replace seals on NH7308 bucket cylinder?????

Is the ring in front of the wiper seal? I see something there, but it looks like cast iron and I assumed it was the top of the cylinder head that the big nut screwed onto. The wiper seal seems to go in behind it. I took a photo, but at the moment I don't have anywhere to post it.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-31-2004, 18:57 Post: 95143
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406
 Replace seals on NH7308 bucket cylinder?????

Never had occasion to take one apart but I'll take a shot. By cylinder head I wonder if you're referring to what my diagrams call the shaft-guide? It is a slug that threads into the cylinder body that the shaft runs through.

I imagine a part like a shaft-guide would have a retaining ring as Oneace says. Look for two metal 'ears' with holes in them that lay flat on the guide around the outside. You'd need retaining ring pliers. Also look for two shallow holes 180-degrees apart. If present, there are special wrenches for such things.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-31-2004, 19:30 Post: 95149
oneace

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Mar 2004
Location: south central pa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1490

2
Filter by User
 Replace seals on NH7308 bucket cylinder?????

Send me a private message and I will return with my e-mail address. Then you can e-mail me the picture and I will circle what needs to be done and e-mail it back.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Thread 94982 Filter by Poster:
choltz 2 | oneace 2 | TomG 1 |




Most Viewed

+ Front End Loader for Honda 5518 Multi-Purpose Trac
+ 7108 Loader
+ Problem Connecting Hydraulic Hoses
+ Great Bend Loader
+ Best way to free a seized pivot bolt / joint ??
+ LA302 Kubota Loader
+ Standard or self-leveling 541 loader for JD5320?
+ FEL Leak Down
+ Loader Buddy
+ 770B Loader

Most Discussion

+ Best way to free a seized pivo
+ I am frustrated with my loader
+ Loader Buddy
+ Loaders..... What would you ch
+ FEL Leak Down
+ Kubota loader installation
+ 410 material bucket to big?
+ my hydraulics quit working
+ Woods vs. Kubota Loaders
+ NH 7308 Loader

Newest Topics

+ Kubota B6200HST Compatible Loader
+ Hydraulic Gremlins
+ 14 LA Loader
+ 14 LA Loader
+ 7308 Loader
+ Tips for First time FEL or Front End Loader users
+ FEL level Indicators Ideas
+ New Holland 1925 Loader 7308 or Third Party Option
+ JD 420 loader toothbar
+ How to store Loader Outdoors and stop rust water d







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines