Tooth Bar for B2910 Loader: Loaders  -- Tractor Attachments Implements 3ph Discussion Forum and Review Tooth Bar for B2910 Loader: Loaders -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Page [ 1 ] | 2 | | Next >>
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 06-24-2002, 20:36 Post: 39821
Nellie



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 Tooth Bar for B2910 Loader

Anyone have any comments on adding a toothbar on the LA402 loader. Is it worth the money? How much does it improve the digging ability? I don't want to use it as a backhoe, but I have mounds of dirt that are hard packed.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-30-2002, 11:40 Post: 39936
matt_barb



Join Date: Jul 2003
Location: Loveland CO
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25
 Tooth Bar for B2910 Loader

This sounds like an impressive bucket edge. I am planning on getting one in the near future. Do a search on Rezloh and you will find several sites with testimonials. If you do get one of these please make a post and let us all know what you think. I will do the same






Link:   Rezloh - Cutting Edge 

Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-01-2002, 07:56 Post: 39947
Art White



View my Photos

View my Photos  Pics
Join Date: Jan 2000
Location: Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6834
 Tooth Bar for B2910 Loader

That make tooth bar is a good one to use but you should look for one that slides over the current edge and bolts onto the sides of the bucket for easy removal. The tooth edge makes back grading harder to get a good finish.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-01-2002, 23:51 Post: 39971
lsheaffer



View my Photos

View my Photos  Pics
Join Date: Jun 1999
Location: Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1000
 Tooth Bar for B2910 Loader

I have bolt in toothbars. They make a big difference when digging. For more info contact me at sheaftractor@coiinc.com






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-07-2002, 12:02 Post: 40120
chim
2002-07-07 00:00:00
Post: 40120
 Tooth Bar for B2910 Loader

I made a toothbar for my LA302. It slips over the existing cutting edge of the loader bucket, and attaches simply with two 3/8" stainless bolts. It has made a trememdous difference in working with packed dirt, scraping up weeds and brush, grabbing and moving tree limbs, etc. Just yesterday it was put to good use. We were planting a bed of flowers that had been untouched for a long time. The walk-behind tiller was bouncing around and not making much progress. The 'Bota was sitting nearby serving as what one poster termed a "diesel wheelbarrow". After a while, I moved the tiller out of the way and brought the tractor over. Teeth down, front wheels off the ground, wiggling bucket back and forth, then curling to pry the concrete-like dirt loose worked quite effectively. Then back with the tiller.

There have been two times when the loader worked better without the toothbar. Both were when scooping loose stones from a pile. One time it was large rock (between baseball and football sized) for filling a washout. The second was with 2A modified (3/4" stone w/ dirt and fines). For the 2A, I was working off a pile that was on my paved driveway, so I didn't want to be leaving tooth scrapes on the blacktop.

A couple pieces of flat stock, weld-on tooth bases and replaceable teeth, a little prep time and an evening with an arc welder was all it took. I forget what the total was, but it was close to $90-something................chim






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-27-2002, 07:36 Post: 40718
Nellie



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 Tooth Bar for B2910 Loader

Chim where did you get your weld on tooth bases and the teeth?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-27-2002, 22:06 Post: 40747
chim
2002-07-27 00:00:00
Post: 40747
 Tooth Bar for B2910 Loader

There's a farm equipment dealer (Binkley & Horst) between Lititz and Ephrata PA where I found a selection. I'd think any decent equipment dealer would have them. The teeth come in various sizes. The ones I used were the smallest they stock, and were plenty large for my bucket. The weld-on teeth were drilled for the roll pin that holds the replaceable tooth on. As one of the other guys who made his own bar stated, assemble the teeth prior to welding. The roll pins take considerable pounding to install them. When the bar is finished there's not much room between teeth to hammer them in. I'll try to post a pic...........chim





Picture Link
Loaders: Tooth-Bar-for-B2910-Loader

Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-24-2002, 17:57 Post: 41591
1st JD
2002-08-24 00:00:00
Post: 41591
 Tooth Bar for B2910 Loader

I priced teeth from a CAT dealer yesterday and he quoted $39 each!! Added up to alot more than I wanted to spend. I need to find another source.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-24-2002, 20:40 Post: 41592
chim
2002-08-24 00:00:00
Post: 41592
 Tooth Bar for B2910 Loader

Prices on the parts I used:

Weld-on bases for teeth = 12L6DW-8-2A-H........$9.95/ea
Replaceable teeth for above = T41166.............$3.08/ea
Roll Pin = 38-32028...............................$0.79/ea


...............chim






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-25-2002, 07:13 Post: 41605
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406
 Tooth Bar for B2910 Loader

Good looking job. Guess I get by with the scarifiers on my box scraper, but if I didn't have the box, I'd sure want something like that. Lots of times neither the loader nor box blade will dig much without some toothy encouragement. I suppose that I have to get my welding act back together one of these days. I only had a gas welder and Id probably buy an arc. I hear that arc is supposed to be easier anyway.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] | 2 | | Next >>

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Thread 39821 Filter by Poster:
1st JD 2 | Art White 1 | chim 4 | lsheaffer 1 | matt_barb 1 | Nellie 2 | TomG 1 |




Most Viewed

+ Front End Loader for Honda 5518 Multi-Purpose Trac
+ 7108 Loader
+ Problem Connecting Hydraulic Hoses
+ Great Bend Loader
+ Best way to free a seized pivot bolt / joint ??
+ LA302 Kubota Loader
+ Standard or self-leveling 541 loader for JD5320?
+ FEL Leak Down
+ Loader Buddy
+ 770B Loader

Most Discussion

+ Best way to free a seized pivo
+ I am frustrated with my loader
+ Loader Buddy
+ Loaders..... What would you ch
+ FEL Leak Down
+ Kubota loader installation
+ 410 material bucket to big?
+ my hydraulics quit working
+ Woods vs. Kubota Loaders
+ NH 7308 Loader

Newest Topics

+ Kubota B6200HST Compatible Loader
+ Hydraulic Gremlins
+ 14 LA Loader
+ 14 LA Loader
+ 7308 Loader
+ Tips for First time FEL or Front End Loader users
+ FEL level Indicators Ideas
+ New Holland 1925 Loader 7308 or Third Party Option
+ JD 420 loader toothbar
+ How to store Loader Outdoors and stop rust water d







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines