NH TC29D Loader options: Loaders  -- Tractor Attachments Implements 3ph Discussion Forum and Review NH TC29D Loader options: Loaders -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 11-25-1999, 00:00 Post: 10366
Peter B.



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

4
Filter by User
 NH TC29D Loader options

Hello AllI am in the final stages of purchasing a NH29D. I am a first time tractor owner and need a little more advice. Is a woods 1012 loader a good choice? I wood like to get a forklift option with quick attach should I go with the Woods or is there a better brand? Does anyone make a snow plow blade that works with a quick attach loader? Could the New Holland controls be adapted to fit the Woods Loader so that I can maintain the user friendly NH control mount and the better loader?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10367
Don



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1
 NH-TC29D-Loader-options

I would reccomend the N.H. loader. Good unit, and someday when you trade or sell, you'll more than get your extra investment back. Curtis Cab Co. makes a super loader blade! Check them out. They fit all major manufacturers loaders.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10368
Peter B.



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

4
Filter by User
 NH-TC29D-Loader-options

Don
Thanks for the fast reply! Does NH have a quick attach system?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10369
Bird Senter

TP Contributor

Join Date: Jun 1999
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 962
 NH-TC29D-Loader-options

Peter B., I'm a Kubota owner myself, but I have a cousin who bought a new TC29 almost a month ago, with the New Holland front loader, and it IS a quick attach model. Folks like Woods, Bush Hog, and others make good products, but as mentioned above, resale will probably be better if tractor and loader are the same brand, plus the fact that, in the unlikely event that you have a problem, you only have one dealer and manufacturer to deal with if they are the same brand.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10371
Peter B.



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

4
Filter by User
 NH-TC29D-Loader-options

I checked out the Curtis Cab web site. It looks like their loader snow plow blade is what I am searching for. It is not clear if that is a quick attach mount or if it will require some pins or bolts. I want to drive up drop the bucket slide into the blade turn a couple of levers and go. Can I? Can I do the same with a forklift attachment?

Peter B.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10372
bo



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 NH-TC29D-Loader-options

I have a curtise snow plow for my JD870-440 loader. Takes about 10 minutes for the change over. I take off the bucket, remove the bucket brackets and drive into the plow put in 4 1x8" pins, hook up the support chain and pop off the roll back and roll forward hydraulic hose and pop on the angle hydraulic hoses and that's it. Sounds more complicated then it really is. Useful tools are a steel drift for alignment and a 3lb hammer to convince the pins that they should cooperate. I also have a small plow for my cub cadet for trim work and that little sucker requires me to in two places at the same time. With a second set of hands,it is not too bad. With out the second set of hands,I resort to profanity and thank God it only happens once a year. Bo






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10374
Peter B.



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

4
Filter by User
 NH-TC29D-Loader-options

bo, could you have purchased the snow plow with a quick attach saystem or does it only work with the pins?
Peter B






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10376
bo



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 NH-TC29D-Loader-options

I wanted the hydraulic angle plow and it came with pins. I don't see how they could make a quick attach system when there has to be a way to attach the angle pistons. This requires a framework and , as it is, even when you quick attach the bucket, you still have to get off of the machine and do some aligning. The plow couldn't be simpler to install and if it could be then I would like to see it. I suppose if you didn't want a hydraulic angle plow, then a quicker method, similar to the bucket attachment could be worked out. Even if you got a plow with manual angle then a frame work would be needed and the attachment would be some slower. As it is, it is one hell of a lot easier and quicker then putting on a 3pt. implement. I have no complaint and think it is well thought out. bo






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 11-25-1999, 00:00 Post: 10377
bo



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 NH-TC29D-Loader-options

peter- I just jumped to the curtis web page and they indicate that a quick attachment is available. I'm curious as to what it is and how much lenght it adds to the plow and if it is really worth a few minutes saved. Their web site is www.curtiscab.com.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Loaders Forum

Thread 10366 Filter by Poster:
Bird Senter 1 | bo 3 | Don 1 | Peter B. 4 |




Most Viewed

+ Front End Loader for Honda 5518 Multi-Purpose Trac
+ 7108 Loader
+ Problem Connecting Hydraulic Hoses
+ Great Bend Loader
+ Best way to free a seized pivot bolt / joint ??
+ LA302 Kubota Loader
+ Standard or self-leveling 541 loader for JD5320?
+ FEL Leak Down
+ Loader Buddy
+ 770B Loader

Most Discussion

+ Best way to free a seized pivo
+ I am frustrated with my loader
+ Loader Buddy
+ Loaders..... What would you ch
+ FEL Leak Down
+ Kubota loader installation
+ 410 material bucket to big?
+ my hydraulics quit working
+ Woods vs. Kubota Loaders
+ NH 7308 Loader

Newest Topics

+ Kubota B6200HST Compatible Loader
+ Hydraulic Gremlins
+ 14 LA Loader
+ 14 LA Loader
+ 7308 Loader
+ Tips for First time FEL or Front End Loader users
+ FEL level Indicators Ideas
+ New Holland 1925 Loader 7308 or Third Party Option
+ JD 420 loader toothbar
+ How to store Loader Outdoors and stop rust water d













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines