Woods XT 160 Wheel turning problem: Tractor Implements  -- Tractor Attachments Implements 3ph Discussion Forum and Review Woods XT 160 Wheel turning problem: Tractor Implements -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 11-04-2002, 05:54 Post: 44577
JMG
2002-11-04 05:54:26
Post: 44577
 Woods XT 160 Wheel turning problem

I bought a used Woods XT 160 Bush Hog. The mower works good except the rear wheel does not pivot very well and tends to drag around corners. The wheel pivots freely if moving it by hand, so I'm sure the shafts not bent. What could be the problem?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 12-03-2002, 09:28 Post: 45671
marklugo



View my Photos

View my Photos  Pics
Join Date: Jul 2003
Location: Tifton, GA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 281
 Woods XT 160 Wheel turning problem

Take a look at the A- frame that holds the tail wheel. Is it slightly twisted or warped? If it is, you may be able to straighten it with a little heat and hammer. Also,be advised that they like plenty of grease. Also, there usally is a washer that the tail wheel pivots on between the tail wheel (king pin) shaft and A-frame. If it was removed or never installed(a common problem) the tail wheel will stick under load. Also try to raise the rear of the cutter to the next adjustment level to put more pressure on the wheel.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Thread 44577 Filter by Poster:
JMG 1 | marklugo 1 |




Most Viewed

+ Tractor Category 1 2 3 Hitch sizes Defined
+ What is 3 point hitch draft control?
+ Howse impliments are junk.
+ Farmi vs. Fransgard Logging Winch
+ Spike tooth drag/harrow
+ Rock picker
+ Tractor Implements Category 1 vs Category 0
+ Kubota rear hydraulics for a log splitter
+ Road-Boss-Grader
+ Box Scraper size

Most Discussion

+ Newbie needs help - box blade
+ Hydraulic actuator (ram)
+ Anybody ever used a Stickler?
+ 3ph assembly for JD 4200 - Nic
+ Post hole diggers
+ Tire Fluid
+ Need a grapple rake for my FEL
+ Small farm tractor attachment
+ Box Scraper size
+ Log Skidding

Newest Topics

+ Leinbach L7200 Post hole digger oil seals
+ Pull type box blades
+ Hydraulic Top Link
+ Speeco 3pt. log splitter
+ Quick Hitch
+ Woods RM59 finish mower
+ Fiberglass thank fittings
+ Best Tractor Implement vs Worst Implement Investme
+ Proper Engine RPM When Using Lift
+ Rebuild PTO pump?







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines