3ph Help!: Tractor Implements  -- Tractor Attachments Implements 3ph Discussion Forum and Review 3ph Help!: Tractor Implements -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-15-2002, 08:55 Post: 41274
IHcubman



Join Date: Jul 2003
Location: Warren, MA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 26
 3ph Help!

I just bought a new Massey Ferguson 1433V compact tractor with a rotary cutter on the back. My problem is the top link and lift arm leveling assembly keep coming loose. The little rods welded to the check nut and the turnbuckle section really doesnít give enough leverage to tighten them up very good. I have tried tightening the check nut with a wrench while putting a tube on the turnbuckle to get extra leverage, but the nut and turnbuckle still loosen up over time. I also tried wrapping a bungee cord around the two, but to no avail. My friend suggested that the surface of the nut might not be flat enough to bind tightly to the turnbuckle body. Are there any suggestions that might help me out? Has anyone else had this problem? It is very discouraging. I can tighten the two together, go mowing, and after a while Iíll notice the right front edge of the cutter digging in. Sure enough, Iíll bring it back to the barn on the level floor and find the leveling adjustment (I only have adjustment on the right side) will have moved. The check nut and turnbuckle may still be tight against each other, but they have moved together. Help!






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-16-2002, 15:18 Post: 41311
MRETHICS
2002-08-16 00:00:00
Post: 41311
 3ph Help!

Other than an adhisive (locktite).I dunno.............

How much vibration is that cutter making?

Or do you have a slow leak in the rear tire on the same side??






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Thread 41274 Filter by Poster:
IHcubman 1 | MRETHICS 1 |




Most Viewed

+ Tractor Category 1 2 3 Hitch sizes Defined
+ What is 3 point hitch draft control?
+ Howse impliments are junk.
+ Farmi vs. Fransgard Logging Winch
+ Spike tooth drag/harrow
+ Rock picker
+ Tractor Implements Category 1 vs Category 0
+ Kubota rear hydraulics for a log splitter
+ Road-Boss-Grader
+ Box Scraper size

Most Discussion

+ Newbie needs help - box blade
+ Hydraulic actuator (ram)
+ Anybody ever used a Stickler?
+ 3ph assembly for JD 4200 - Nic
+ Post hole diggers
+ Tire Fluid
+ Need a grapple rake for my FEL
+ Small farm tractor attachment
+ Box Scraper size
+ Log Skidding

Newest Topics

+ Leinbach L7200 Post hole digger oil seals
+ Pull type box blades
+ Hydraulic Top Link
+ Speeco 3pt. log splitter
+ Quick Hitch
+ Woods RM59 finish mower
+ Fiberglass thank fittings
+ Best Tractor Implement vs Worst Implement Investme
+ Proper Engine RPM When Using Lift
+ Rebuild PTO pump?













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines