Go Bottom Go Bottom

Fiberglass thank fittings

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-07-14          190699

I have a 500 gallon fiberglass sprayer tank that I would like to replace the drain fitting with a fitting that has support and a seal inside the tank rather than just the large flat type O ring it uses. I have never been able to keep that O ring type fitting from some leaking.

Of if there is a sealant to use to prevent small leak. kt

FYI, fiberglass tank fittings or the ones I have seen for drain do not use threads in the tank, only held in place with the friction of the tight "o" ring.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Fiberglass thank fittings

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-07-15          190706

Finally found what I needed at USPlastic. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login