methods for offsetting 3pth implements: Tractor Implements  -- Tractor Attachments Implements 3ph Discussion Forum and Review methods for offsetting 3pth implements: Tractor Implements -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-26-2000, 20:32 Post: 16701
Eric Edwards



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1
 methods for offsetting 3pth implements

I have a 48" Mott flail mower. I have traded up from a 46" wide tractor to a 60" one. I can't afford to replace it with a longer model. The 3pth frame is fixed as far as I can tell. Is there any technique besides adjusting the sway chains to offset this mower in relation to the rear tires to bring it even with one side or the other.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-19-2002, 01:16 Post: 34690
BCalvin
2002-01-19 00:00:00
Post: 34690
 methods for offsetting 3pth implements

If the three point is not welded to the mower you can replace one side of the three point which would allow the mower to run behind one tire...I have a JD 950 HC which is offset similiar to an old Cub....all of my implements must be offset and I have to reweld rhe three point.....the only thing you must be careful of is the alignment of your pto.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Tractor Implements Forum

Thread 16701 Filter by Poster:
BCalvin 1 | Eric Edwards 1 |




Most Viewed

+ Tractor Category 1 2 3 Hitch sizes Defined
+ What is 3 point hitch draft control?
+ Howse impliments are junk.
+ Farmi vs. Fransgard Logging Winch
+ Spike tooth drag/harrow
+ Tractor Implements Category 1 vs Category 0
+ Rock picker
+ Kubota rear hydraulics for a log splitter
+ Road-Boss-Grader
+ Box Scraper size

Most Discussion

+ Newbie needs help - box blade
+ Hydraulic actuator (ram)
+ Anybody ever used a Stickler?
+ 3ph assembly for JD 4200 - Nic
+ Post hole diggers
+ Tire Fluid
+ Need a grapple rake for my FEL
+ Small farm tractor attachment
+ Box Scraper size
+ Log Skidding

Newest Topics

+ Leinbach L7200 Post hole digger oil seals
+ Pull type box blades
+ Hydraulic Top Link
+ Speeco 3pt. log splitter
+ Quick Hitch
+ Woods RM59 finish mower
+ Fiberglass thank fittings
+ Best Tractor Implement vs Worst Implement Investme
+ Proper Engine RPM When Using Lift
+ Rebuild PTO pump?













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines