Mounting small backhoe on JD f-1145: Back Hoe  -- Tractor Attachments Implements 3ph Discussion Forum and Review Mounting small backhoe on JD f-1145: Back Hoe -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 03-07-2002, 12:39 Post: 36168
paul ruff



Join Date: Feb 2002
Location: iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 11

3
Filter by User
 Mounting small backhoe on JD f-1145

I have a small backhoe (case D-100) that came off of a case 648, the 648t does not have the power/ability to move the hoe from place to placeon rough ground or slopes greater than 10%. I have a JD F-1145 (same running gear as 855) 4wd 30+hp. I know weight will not be an issue, I currently have a 700# snowblower on the front with no counter weight on the back, I will be adding 300# counter weight on the back of the 1145 (the max that the owners manual recommends). Any suggestions on what to watch out for, tips, other ideas. The d-100 is a hevily built hoe , digs 7' deep, and easily drags the 648 around when I am using it. I am also making a additional bracket to mount the backhoe on to a skidloader. The hydraulic power will be supplied by a pump (1500 psi) and a tank that I am adding for the 1145 and the skidloader will use the aux hydraulics with a pressure relief valve set at 1500 psi. The hoe works great but I need to get it to areas that the 648 cannot get too.
thanks
paul
JD f-1145//530//630//720//730//830






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-13-2002, 11:35 Post: 38560
Tom Bandoni
2002-05-13 00:00:00
Post: 38560
 Mounting small backhoe on JD f-1145

Hi Paul, I'm looking for parts for a d-100 attachment, any ideas ? Tom -- bandoni1@cox.net






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-14-2002, 06:06 Post: 38582
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Mounting small backhoe on JD f-1145

Paul: I'm just curious if 1500 psi is within the recommended pressure range for the hoe. I think that 1500 is the lower end of the recommended pressures for several hoes I looked at. Maybe the hoe gets its power from large cylinders and a high flow pump rather than higher pressures.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-14-2002, 06:39 Post: 38584
paul ruff



Join Date: Feb 2002
Location: iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 11

3
Filter by User
 Mounting small backhoe on JD f-1145

From the information I have on the 648 is that the pressure relief valve is set at between 1500-1700 psi and it has around a 7gpm pump at 1500 psi. the pump I am using is 8 gpm and 2000 psi (with a pressure relief valve set at 1500 psi). So far I have the bracket made for the 1145 with the pump installed, I have mounted the new oil reserve on the back of the 1145 along with a weight bar to add the weights to it. Next up is to get the pto drive to the pump set up, and get the hydraulic lines plumbed.
I also am working on the 648 to try and determine why it has such a hard time moving under load, rewiring the whole unit. I have a lot of mulch to move and the loader makes it easier to load....
paul






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-15-2002, 06:02 Post: 38623
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Mounting small backhoe on JD f-1145

There's a lot of discussion in the archives about 3ph and sub-frame mounts. You perhaps already know the stuff about 3ph mounts and potential damage to a tractor and various safety things--especially the lock-down for a 3ph mount. Im not clear on what type mount is used, but it sounds like an interesting project.

I might do a think through about how well matched an 855 is for a powerful 7'hoe. I run a 3ph Kelley B600 from tractor hydraulics at around 8gpm and 1850 lbs. relief valve pressure. The plumbing is off a 3rd valve on my loader valve assembly, which is a power beyond type. The set-up works fine. My Ford 1710 has about 500 lbs, not including loader, and 1000 lbs more 3ph capacity than an 855. I think of the Kelley hoe as fairly modest powered hoe. Im not sure Id want put something with much more power on a 3ph mount.

Another thought might be about the reservoir size for the PTO pump. There is a relationship between reservoir size and the amount of work that can be done. Too small a reservoir and the oil over-heats if a hoe is worked hard. I guess that's a wait and see if it's a problem sort of issue. Hope this project works out well.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-15-2002, 06:47 Post: 38626
paul ruff



Join Date: Feb 2002
Location: iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 11

3
Filter by User
 Mounting small backhoe on JD f-1145

For the backhoe I had a local welder make an adapter bracket to connect to the 1145 which connects to the lift arms and when in position is bolted to the frame, this bracket also holds the hydraulic pump. The oil reservoir is 15 gallon ( rule of thumb is that it is 1 1/2 times the gpm in gallons)
For heavy digging the 648 will still be available, but for getting to some of the places for light digging I need the 4wd.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-16-2002, 06:15 Post: 38669
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Mounting small backhoe on JD f-1145

Paul: A reservoir capacity 1.5 times the pump rating is the rule of thumb that I now recall. Thanks for jogging my memory. Sounds like you've got a good handle on the project. Somebody on the SSB board is thinking about a similar project and I referred him to this discussion.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Thread 36168 Filter by Poster:
paul ruff 3 | Tom Bandoni 1 | TomG 3 |




Most Viewed

+ Woods 9000 sub-frame backhoe
+ Backhoe Hydraulic Hose Line Set up???
+ Kit Built Backhoe Review Advice
+ small backhoe bucket
+ Taylor-Way backhoe Reviews?
+ Case backhoe value-kelly blue book
+ subframe vs 3 point
+ JD model 48 backhoe attachment plates for JD 4600
+ kelly backhoe
+ CADDigger 608 Building Experiences

Most Discussion

+ Backhoes and breaking frames
+ Backhoe Hydraulic Hose Line Se
+ Back hoe on a sub-compact
+ JD 48 Dipper cylinder
+ TC33D New Holland breaking in
+ THUMB SIZE
+ CADDigger 608 Building Experie
+ Backhoe decision, help !!!!!
+ subframe vs 3 point
+ Backhoe Bucket sizes

Newest Topics

+ Update - Backhoe Attachment
+ woods backhoe bh106 what is the weight
+ Rigid Toplink for 3 point hitch Backhoe
+ 3PH Backhoe Flushing Lines and Cylinders
+ Brands Mfg. 3pt. backhoe
+ LW-6 3 point hitch
+ cub cadet 7205 Which backhoe will fit ??
+ 8LD Bucket
+ LW-6 3ph backboe how to test pump after hydraulic
+ backhoe for deutz agrotron 155cv













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines