mini backhoe controls: Back Hoe  -- Tractor Attachments Implements 3ph Discussion Forum and Review mini backhoe controls: Back Hoe -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 03-26-2009, 13:32 Post: 161421
sstanchak



Join Date: Mar 2009
Location: NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5

4
Filter by User
 mini backhoe controls

I have a mini backhoe on the back of my Kabuta .. not sure if it's Kubota aor another brand. My problem is the control linkage. I have one lever that is suppose to control boom up and down and sifde and side and the other controls bucket curl and forarm motion (not sure what the terms are. The four vales are conected with 4 car connection ends .. not working very good .. if anyone has a similar set up I would love a photo and or advice

thanks
steve






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 15:27 Post: 161422
Murf

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 1999
Location: Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7012

2
Filter by User
 mini backhoe controls

Quote:
Originally Posted by sstanchak | view 161421
The four vales are conected with 4 car connection ends .. not working very good ..



Steve, maybe you can explain what you mean a little better, I don't have any clue what a "car connection ends" might be.

What is "not working very good" about them?

Generally the hydraulics are either screwed together or use standard quick disconnect fittings.

Best of luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 15:36 Post: 161423
sstanchak



Join Date: Mar 2009
Location: NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5

4
Filter by User
 mini backhoe controls

I know .. not a good description!!ok .. as I sit in the seat there are two levers that control the bucket ... each lever / handle runs two valves .. the linkage from the lever to the two vlaves are via small .. ah .. tie rod ends. Wish i had a pic so I could post .. anyway looking to see how these linkages are suppose to be!
steve






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 16:00 Post: 161424
auerbach



View my Photos

View my Photos  Pics
Join Date: Sep 2007
Location: West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2168
 mini backhoe controls

If some terminology might help, the standard hoe is, like your arm, in three sections: boom, dipper, bucket. The first two raise and lower, the bucket curls and dumps. And the assembly swings left/right.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 16:12 Post: 161425
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764
 mini backhoe controls

When you say it's not working very good, could you describe what it is or is not doing? If it's jerky, sometimes the controls are very sensitive and the operator needs to develop a feel for them. If that's the case, feathering the controls lightly will smooth out the operation.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 16:43 Post: 161426
sstanchak



Join Date: Mar 2009
Location: NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5

4
Filter by User
 mini backhoe controls

Thanks for the names .. I knew dipper too .. just not at the moment! Anyway .. my control has nothing to do with the valves... if I had four levers I would be fine .. then the linkage from each lever to the two valeves .. the handle spins so when I pull stright back that should lift the boom it swings to the side. Unless you had this typle of connection its hard to imagain. can I post photos here?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-26-2009, 17:27 Post: 161427
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853
 mini backhoe controls

Kenny you didn't tell us you have relatives in NY! ROGLMAO






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-27-2009, 09:10 Post: 161442
Murf

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 1999
Location: Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7012

2
Filter by User
 mini backhoe controls

Ok, now I'm getting the picture, it's still a little fuzzy in that I can't figure out what could be 'spinning' that would change the direction of the controls.

I do know the parts you are speaking about as far as the push rods that actuate the valves when you move the levers, they have a tiny flex joint much like an automotive ball joint to allow a fluid motion in a wide variety of directions.

I suspect the 4 way levers are fixed by a (or a pair of) nuts around a threaded sleeve. It appears one has come loose. Have a look at where the lever mounts to the B/H and see (maybe under the rubber dust boot?) if a lock nut has come loose.

Best of luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-03-2009, 14:13 Post: 161687
sstanchak



Join Date: Mar 2009
Location: NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5

4
Filter by User
 mini backhoe controls

Is there a way to post pics here .. this is an old devil and yea the valves connect via little tie rod ends ... but there is no dust boot and probably been cobbled up over and over again .. just trying to find out how they ussually work.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-06-2009, 00:24 Post: 161759
JD-855-in-WI



View my Photos

View my Photos  Pics
Join Date: Jan 2009
Location: Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 36
 mini backhoe controls

I've had this happen on my woods 750. A little cam slipped on the level and all the sudden the dipper was moving in to opposite directions. Check out the Woods site, they have all of the diagrams posted in a PDF. The lever set-up may be close to yours. My problem was a loose locknut on the bottom of the lever.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Thread 161421 Filter by Poster:
auerbach 1 | earthwrks 1 | JD-855-in-WI 1 | kwschumm 1 | Murf 2 | sstanchak 4 |




Most Viewed

+ Woods 9000 sub-frame backhoe
+ Backhoe Hydraulic Hose Line Set up???
+ Kit Built Backhoe Review Advice
+ small backhoe bucket
+ Taylor-Way backhoe Reviews?
+ Case backhoe value-kelly blue book
+ subframe vs 3 point
+ JD model 48 backhoe attachment plates for JD 4600
+ kelly backhoe
+ CADDigger 608 Building Experiences

Most Discussion

+ Backhoes and breaking frames
+ Backhoe Hydraulic Hose Line Se
+ Back hoe on a sub-compact
+ JD 48 Dipper cylinder
+ TC33D New Holland breaking in
+ THUMB SIZE
+ CADDigger 608 Building Experie
+ Backhoe decision, help !!!!!
+ subframe vs 3 point
+ Backhoe Bucket sizes

Newest Topics

+ Update - Backhoe Attachment
+ woods backhoe bh106 what is the weight
+ Rigid Toplink for 3 point hitch Backhoe
+ 3PH Backhoe Flushing Lines and Cylinders
+ Brands Mfg. 3pt. backhoe
+ LW-6 3 point hitch
+ cub cadet 7205 Which backhoe will fit ??
+ 8LD Bucket
+ LW-6 3ph backboe how to test pump after hydraulic
+ backhoe for deutz agrotron 155cv













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines