Backhoe storage: Back Hoe  -- Tractor Attachments Implements 3ph Discussion Forum and Review Backhoe storage: Back Hoe -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 09-24-2007, 16:33 Post: 146026
in2ba8b4



Join Date: Sep 2007
Location: Saline, MI. (near Ann Arbor)
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1
 Backhoe storage

Hi to everyone,
This is my first post although I feed on all the good information this site contains.
Anyhow, my question is about storing my NH 757C backhoe. I has told by someone that if it is going to be stored over the winter for example, the boom must be kept in the extended position.

Given the limited space in my pole barn, having it extended makes for a big obstacle.
Anyone have any ideas bout position when setting for a period of time?. Your input would be greatly appreciated.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-24-2007, 17:29 Post: 146027
harvey



View my Photos

View my Photos  Pics
Join Date: Sep 2000
Location: Moravia, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1525
 Backhoe storage

I think many people try and keep the cylinders closed.

I store mine upright, spray some oil on the cylinders, tie all the hydraulics up with rope and throw a bikini tarp over the top to keep the bird poo off.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-24-2007, 18:35 Post: 146030
hardwood

TP Contributor

Join Date: Dec 2002
Location: iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3582
 Backhoe storage

Harvey has it right. Long as you are inside out of the sun and rain a bit of oil on the cylinder rods is fine. A bigger issue over time is the sun destroying the hydraulic hoses. It happens slowly so you really never notice it till all of a sudden they go bad. Frank.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-24-2007, 19:17 Post: 146031
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

2
Filter by User
 Backhoe storage

First I would give the entire thing a good bath and let it dry well for a few days out in the sun. I would then slather marine-grade waterproof grease over everything. This will soak unto the lines and keep them supple. Come spring give it agood washing with warm/hot dish detergent or concentrated hair shampoo. The paint will soak up some of the oils too and keep it from breaking down or drying out. Do not use diesel or kerosene. They actually attract moisture and accelerate rusting. And diesel supports bacterial life too, which depending on the byproducts like acids will hurt too.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-27-2007, 11:07 Post: 146147
yooperpete



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1413

2
Filter by User
 Backhoe storage

As was said, clean it up and retract all cylinders as far as possible. Any shafts exposed get sprayed with a Rust Inhibitor fortified with Lanolin. I use Crown products. That absorbs moisture and neutralizes acids. Keeping it undercover protecting against rain, snow and sun is important. Also try not to park it on dirt or where moisture can come up out of the ground. If so, put a couple sheets of plywood underneath to block it. I try not to get much stuff on the hoses. Some rust preventives breakdown the rubber.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-27-2007, 21:22 Post: 146183
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

2
Filter by User
 Backhoe storage

Yooper my boy, don't be foolin' this fellow Michigander... which oils break down hose rubber? Solvents maybe, but oils? 'member they have OIL running through them and hoses of today are made for petroleum-based products. If you want to destroy a hose, just paint it.

Good point about lanolin which is made from sheeps wool. There's much on the web to be said about it.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-28-2007, 07:59 Post: 146193
candoarms



View my Photos

View my Photos  Pics
Join Date: Mar 2007
Location: North Dakota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1929
 Backhoe storage

In2ba8b4,

The most important thing is to relieve any pressure that you might have remaining on the hydraulic cylinders.

The best way to do this is to shut the tractor off and then move all of the valves back and forth, before disconnecting the lines from the tractor.

You'll also want to block, or chain up anything that may drift down over time, to prevent any pressure from building up later (or to prevent your tarp from being ripped to pieces) -- though this isn't absolutely necessary, as the pressure on the cylinders will be very low.

The other important issue is to hang your hoses in such a way as to keep any moisture from getting into the hydraulic connections. Tie your hoses high, and let the ends hang down, but make sure they're not touching the ground.

Do not place any bags or tape over the end of your hoses, as these things collect and hold water.

A bit of grease on any exposed cylinder rods will serve to keep them from rusting and pitting. Before using the machine next time, make sure to wipe off the cylinder rods, as the grease will collect lots of dirt and sand.

A tarp isn't a bad idea, but be sure to leave an air gap at the bottom. Any moisture that collects under the machine will soon turn into a steam bath under that tarp. Leave a good foot of air gap at the bottom, and use bungee cords to hold the tarp in place, rather than blocks, tires, etc. A tarp that is too small is better than a larger one. Nothing causes rust to occur faster than when placing a piece of metal in a plastic bag. Leave it open to the air as much as possible.

Paint will fade over time when left in the sun. It might be better to place the backhoe on the north side of a building, where it will be out of the direct sun, especially if you plan on storing it outdoors for an extended period of time. Leave it far enough away from the building to prevent any run-off from the roof from pouring directly onto your backhoe.

Parking any implement outdoors will require a good bit of grease on the pins, holes, pivot points, etc. Make sure you grease up all of these things before parking it.

If you plan on leaving it outdoors for an exceptionally long period of time, I recommend removing the seat (if it has one) and placing it inside your house, or in a dry shed.

Joel






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-28-2007, 08:21 Post: 146194
yooperpete



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1413

2
Filter by User
 Backhoe storage

Earthworks:
Thankyou, I edited my message and removed oils and inserted "some rust preventatives". Some of them have have ingredients that can turn rubber into mush over an extended period of time.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Thread 146026 Filter by Poster:
candoarms 1 | earthwrks 2 | hardwood 1 | harvey 1 | in2ba8b4 1 | yooperpete 2 |




Most Viewed

+ Woods 9000 sub-frame backhoe
+ Backhoe Hydraulic Hose Line Set up???
+ Kit Built Backhoe Review Advice
+ small backhoe bucket
+ Taylor-Way backhoe Reviews?
+ Case backhoe value-kelly blue book
+ subframe vs 3 point
+ JD model 48 backhoe attachment plates for JD 4600
+ kelly backhoe
+ CADDigger 608 Building Experiences

Most Discussion

+ Backhoes and breaking frames
+ Backhoe Hydraulic Hose Line Se
+ Back hoe on a sub-compact
+ JD 48 Dipper cylinder
+ TC33D New Holland breaking in
+ THUMB SIZE
+ CADDigger 608 Building Experie
+ Backhoe decision, help !!!!!
+ subframe vs 3 point
+ Backhoe Bucket sizes

Newest Topics

+ Update - Backhoe Attachment
+ woods backhoe bh106 what is the weight
+ Rigid Toplink for 3 point hitch Backhoe
+ 3PH Backhoe Flushing Lines and Cylinders
+ Brands Mfg. 3pt. backhoe
+ LW-6 3 point hitch
+ cub cadet 7205 Which backhoe will fit ??
+ 8LD Bucket
+ LW-6 3ph backboe how to test pump after hydraulic
+ backhoe for deutz agrotron 155cv







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines