Help removing a Woods 750 back hoe: Back Hoe  -- Tractor Attachments Implements 3ph Discussion Forum and Review Help removing a Woods 750 back hoe: Back Hoe -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 10-29-2006, 16:09 Post: 136397
raiseanative



Join Date: Oct 2006
Location: Chicago, Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

3
Filter by User
 Help removing a Woods 750 back hoe

I've started removing a Woods 750 back hoe from a Deere 750, 3 point hitch. I'm stuck on getting the hydraulic pump off the PTO.

I've looked at the owner's manual, but it doesn't help.

Any suggestions?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-29-2006, 16:20 Post: 136398
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

2
Filter by User
 Help removing a Woods 750 back hoe

Have you had it off before? There's a groove running around the circumference of the pto shaft and the pump coupler uses a ball and spring mechanism to lock onto that groove. There are a couple of different kinds of mechanisms. The ones I have all have a ring around the coupler that you slide back to release the tension on the balls, which releases the lock and then the coupler can slide off. I don't remember how the other kind of locking mechanisms work but if you fiddle around I'm sure you can figure it out.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-29-2006, 16:24 Post: 136399
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

2
Filter by User
 Help removing a Woods 750 back hoe

I remembered another kind of lock, my old chipper had one. If there's a push button on the collar around the coupler you need to push it in while sliding the pump off.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-29-2006, 16:28 Post: 136400
raiseanative



Join Date: Oct 2006
Location: Chicago, Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

3
Filter by User
 Help removing a Woods 750 back hoe

No, I haven't tacken it off before. I just bought it. Its a 1986 Deere, and I don't know how long the back hoe has been on. So I don't know if its frozen.

I found what looks like a sleeve, with a spring loaded button. That sounds like what you're describing. But I can't get it to slide. I sprayed some WD-40, but I didn't want to force it, because I wasn't sure it was.

I appreciate the help.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-29-2006, 18:33 Post: 136401
hardwood

TP Contributor

Join Date: Dec 2002
Location: iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3582
 Help removing a Woods 750 back hoe

If you have found a botton about 5/8 inch diamater with kind of a rounded top that sticks out about 3/4 of an inch on the side of the pto sleeve then that is the release botton. give it a good dose of WD 40 and if the botton won't push with your thumb then get a hammer and just tap it lightly, it should move unless it is terribly rusted. the button has to be pushed down level with the top of the hole it's in and held there while you slide the coupler off the pto shaft. Best of luck. Frank.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-29-2006, 20:17 Post: 136403
JimP



Join Date: Jul 2003
Location: NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 58
 Help removing a Woods 750 back hoe

Ken and Frank have it right. I have Woods 650 about the same vintage with the same PTO pump setup. You may need to use a small hammer to "help" it along -- just try to pull it straight back; otherwise, it will hang up if it is cocked at any angle. Mine still comes off with a fight today. I think I may have used a Wonder-bar (crow bar) to get it off the first time -- just make sure the pin is depressed.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-31-2006, 19:34 Post: 136459
raiseanative



Join Date: Oct 2006
Location: Chicago, Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

3
Filter by User
 Help removing a Woods 750 back hoe

Thank you all for the help.

This is going to have to wait a few more days before I get back to it, but I appreciate the your guidance.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 12-11-2006, 23:56 Post: 137868
WillieH



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 542
 Help removing a Woods 750 back hoe

raiseanative ~
JimP and I both have the 650 Woods, and not unlike JimP, every now and then, the little bugger sticks a bit. Wd40, PBBlaster, any of these penetrants will work to spray on and seep in for a bit.
My recommendation, however, is not to use a metal surface to contact the press/release button on the pump coupler. Rather use a piece of wood, approx. 1 in x1 in., and tap that with the hammer against the press button.
Two reasons: number one, everyones -tap- is different in strength, and one could very well pein over or mushroom the press button, to the point where it won't depress.
Secondly, remember your thumb USUALLY will be able to depress this button. If you smack it with a hammer, a burr may develop, that you don't know of or cannot see. The next thing is a tetanus shot at the local clinic as your hand is bleeding out! Use a small block of non marring material.

~ Willie H






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Back Hoe Forum

Thread 136397 Filter by Poster:
hardwood 1 | JimP 1 | kwschumm 2 | raiseanative 3 | WillieH 1 |




Most Viewed

+ Woods 9000 sub-frame backhoe
+ Backhoe Hydraulic Hose Line Set up???
+ Kit Built Backhoe Review Advice
+ small backhoe bucket
+ Taylor-Way backhoe Reviews?
+ Case backhoe value-kelly blue book
+ subframe vs 3 point
+ JD model 48 backhoe attachment plates for JD 4600
+ kelly backhoe
+ CADDigger 608 Building Experiences

Most Discussion

+ Backhoes and breaking frames
+ Backhoe Hydraulic Hose Line Se
+ Back hoe on a sub-compact
+ JD 48 Dipper cylinder
+ TC33D New Holland breaking in
+ THUMB SIZE
+ CADDigger 608 Building Experie
+ Backhoe decision, help !!!!!
+ subframe vs 3 point
+ Backhoe Bucket sizes

Newest Topics

+ Update - Backhoe Attachment
+ woods backhoe bh106 what is the weight
+ Rigid Toplink for 3 point hitch Backhoe
+ 3PH Backhoe Flushing Lines and Cylinders
+ Brands Mfg. 3pt. backhoe
+ LW-6 3 point hitch
+ cub cadet 7205 Which backhoe will fit ??
+ 8LD Bucket
+ LW-6 3ph backboe how to test pump after hydraulic
+ backhoe for deutz agrotron 155cv













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines