plow: Snowblowers / Snow Plows / Removal  -- Tractor Attachments Implements 3ph Discussion Forum and Review plow: Snowblowers / Snow Plows / Removal -- Tractor Attachments Implements 3ph Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Snowblowers / Snow Plows / Removal Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 12-12-2000, 18:58 Post: 22376
cutter



View my Photos

View my Photos  Pics
Join Date: Feb 2000
Location: The South Shore of Lake Ontario, New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1292

2
Filter by User
 plow

I located an old Meyers snow plow with hyd. cylinders for sale nearby. I know how I am going to rig it on my 7108 loader arms (by looking at the "Curtis" plow pictures, but am wondering if there would be an easier, faster and more cost effective way than having the brackets made. Perhaps an inexpensive implement that is made for the N/H loader that could be dissected and used as an intermediate mounting device. An old bucket might even work for that. Are the mounts similar on any of the makes or even on the different N/H loaders? All I really need is the area that is used for pinning the end of the loader and cylinder to the implement and can modify from that point.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 12-12-2000, 20:01 Post: 22380
charlie



Join Date: Mar 2005
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 64
 plow

many years ago my dad adapted a meyers plow onto a massey loader.the bottom mount is a 4x4 1/2 inch angle.cut the angle to the length you want,put it up to the loader and mark where you want to weld the mounts,drill the pin holes,and then weld in place.do the same to the top but be sure to off set it forward about 4 inchs.i don't have a scaner our i would send a pic.i also put a 3 point mount in between the loader mount so i can use it on the back too.this plow has been used over 30 years without a problem.good luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 12-12-2000, 20:15 Post: 22381
cutter



View my Photos

View my Photos  Pics
Join Date: Feb 2000
Location: The South Shore of Lake Ontario, New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1292

2
Filter by User
 plow

Thanks Charlie. I think what you are describing would make it a direct mounting to the blade. I am trying to use the plow and Hyd. angle fixture as well to enable the hydroturn. Cutter






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Snowblowers / Snow Plows / Removal Forum

Thread 22376 Filter by Poster:
charlie 1 | cutter 2 |




Most Viewed

+ How to build a Front End Loader Snow Blade
+ 3pt. Snowblower Brands??
+ 3 point snow blowers
+ McKee Snowblower Chute Operation
+ 3 pt to front mount
+ Kubota B2782 snowblower 63 front mount
+ Woods SB72 Snowblower
+ Front End Snowblower vs. 3 PH Rear Mounted Snowblo
+ Garden tractor with snowblower???
+ Front end loader snowblower?

Most Discussion

+ How to build a Front End Loade
+ 3pt. Snowblower Brands??
+ Garden tractor with snowblower
+ Survey How long is your drivew
+ Snow Plow on Tractor
+ Snow-plow
+ top qualitysnowblowers ?
+ hydraulic snowblowers
+ JD plow
+ JD 4300 snowblower attach

Newest Topics

+ Cat 1 Lift Arm Pins
+ Ready for Titan Snow with Loftness Rear Snow Blowe
+ 540 PTO speed too slow for snow blower
+ Survey How long is your driveway for snow removal?
+ Kubota B7500 used snowblower cost
+ kubota B7800, front end snow blower Hose Attachmen
+ Kubota B7610 BX2750 Snowblower Video
+ Show Your Snow Removal Equipment
+ snowblower
+ FORD 715A Snowblower operating speed







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines