Jinma Tractor w/transmission problems ???: Other Tractor Brands  -- Other Tractor Brands Discussion Forum and Review Jinma Tractor w/transmission problems ???: Other Tractor Brands -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Other Tractor Brands Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 07-08-2009, 13:29 Post: 163893
JohnCig3



Join Date: Jul 2009
Location: Parsons, Kansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

2
Filter by User
 Jinma Tractor w/transmission problems ???

I have a 06' Jinma Tractor, 28 hp, 3-cyl diesel with 20 hours on it. This tractor has the shifter w/three gears between your feet and a forward/reverse lever on the left side of the steering column. A few days ago while operating it, it seemed to 'lose' the forward gears. I pulled the lever back into reverse and the tractor responded properly. I again tried to put it into forward and the tractor did so. Later in the day, I again lost forward gears abd when I tried the reverse, it would not move the tractor. There is no grinding, nothing seems loose, but I'm wondering if the cable that comes off of this 'forward/reverse' lever hasn't worked loose or out-of-adjustment. Has anyone out there ever experienced similiar problems? HELP !!!






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-08-2009, 13:38 Post: 163894
auerbach



View my Photos

View my Photos  Pics
Join Date: Sep 2007
Location: West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2168
 Jinma Tractor w/transmission problems ???

Ask on the Chinese Tractor Owners Association site.

Meanwhile, typically the F/R lever ends in a clevis into which fits a rod held by a pin that might be broken or loose.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 07-08-2009, 14:00 Post: 163896
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 Jinma Tractor w/transmission problems ???

That shuttle shift is via cable. The most common reason for your problem is a sheared roll pin somewhere along the cable path. They're external, no need to take any covers off. This is a commonly reported issue, and conventional wisdom advises to double up on replacement roll pins. That is, find the correct replacement size, then buy a smaller one to drive inside the replacement. In short, a 2nd roll pin reinforcing the 1st roll pin from the inside.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 02-26-2010, 16:02 Post: 168834
petschllr



Join Date: Feb 2010
Location: maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 Jinma Tractor w/transmission problems ???

I had the exact same problem with my Jenma as you mentioned with the transmission not going into gear. I have very low hours as well. Did you find a remedy?

thanks. Pete

I have a 06' Jinma Tractor, 28 hp, 3-cyl diesel with 20 hours on it. This tractor has the shifter w/three gears between your feet and a forward/reverse lever on the left side of the steering column. A few days ago while operating it, it seemed to 'lose' the forward gears. I pulled the lever back into reverse and the tractor responded properly. I again tried to put it into forward and the tractor did so. Later in the day, I again lost forward gears abd when I tried the reverse, it would not move the tractor. There is no grinding, nothing seems loose, but I'm wondering if the cable that comes off of this 'forward/reverse' lever hasn't worked loose or out-of-adjustment. Has anyone out there ever experienced similiar problems? HELP !!!






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 02-26-2010, 16:11 Post: 168835
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 Jinma Tractor w/transmission problems ???

Quote:
Originally Posted by petschllr | view 168834
I had the exact same problem with my Jenma as you mentioned with the transmission not going into gear.

Well, perhaps we have a terminology problem - cuz Johns' issue was with the shuttle shift. That constitutes an issue with the mid-connect box, rather than with the transmission.

So for clarification; is your problem with the forward/reverse lever (shuttle) or with the actual gear shift lever (transmission)?

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 02-26-2010, 16:12 Post: 168836
JohnCig3



Join Date: Jul 2009
Location: Parsons, Kansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3

2
Filter by User
 Jinma Tractor w/transmission problems ???

Yes I did. It was exactly what was thought to be the problem. If you follow the F/R cable down under the tractor, you will find a roll pin that the cable runs thru. The pin was slightly 'cocked' in the holder, allowing the cable to move, but without the needed tension to activate the transmission. It's hard to locate, so don't give up. My problem pin was just under the right foot location, but couldn't be seen until you got under the tractor. I had a friend move the cable back and forth until I located it. Good luck, good tractor when you can keep them running :+))






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 02-26-2010, 18:59 Post: 168842
petschllr



Join Date: Feb 2010
Location: maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 Jinma Tractor w/transmission problems ???

it's with the f/r lever. It quit going into forward and reverse. the lever at the box under the tractor is going the full direction with the lever but no engagement inside..

thx






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 02-26-2010, 23:35 Post: 168844
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 Jinma Tractor w/transmission problems ???

Well, I think there are two roll pin locations; one on either end of the cable. If they're both ok, it may be the shift lump inside the mid-connect box. To check that, you'll have to remove the cover plate. The shift lump location is should be right where the linkage rod goes through the housing. I guess it must be a cast part, cuz there have been several reports of them breaking apart. If that's the case, you'll have metal in the bottom of the case that must be removed too.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-01-2010, 18:57 Post: 168898
petschllr



Join Date: Feb 2010
Location: maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 Jinma Tractor w/transmission problems ???

You were right it was the roll pin and I'm back in biz. thanks!

are you also an expert with the 3 pt lift? it doesn't work.. The pto works fine and the front end loader etc.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Other Tractor Brands Forum

Thread 163893 Filter by Poster:
auerbach 1 | greg_g 3 | JohnCig3 2 | petschllr 3 |




Most Viewed

+ Task Master Tractors.Are they any good??
+ Branson Tractor Review
+ Mahindra are they good review
+ Branson vs. Century
+ What about Mccormick tractors?
+ Leaf vacuum for catagory I three point
+ New to me Bolens Tractor
+ Mahindra - Starting problems
+ TYM and Terramite Tractors
+ FarmTrac 300DTC

Most Discussion

+ Task Master Tractors.Are they
+ TIME TO START MAHINDRA DISCUSS
+ Need help from all you PROs
+ Branson vs. Century
+ TYM and Terramite Tractors
+ Honda Compact tractor
+ blue book for tractors
+ Mahindra, Kioti, Brason and Cu
+ seatbelt survey
+ Branson Vs Century

Newest Topics

+ 1983 Allis Chalmers 6140 4WD
+ taishan tractor help help
+ parts dougfeng task master trooper 426E 4X4
+ parts dougfeng task master trooper 426E 4X4
+ foton 404 3cyl
+ rhino tractor
+ Foton ft404 black diesel splat out of exhaust
+ taishan 304 diesel timing
+ Branson 4220 racing problem
+ taishan ts304a injection pump info







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines