Sensitivity of rear remote hydraulics: New Holland Tractor Review  -- New Holland Tractors Discussion Forum and Review Sensitivity of rear remote hydraulics: New Holland Tractor Review -- New Holland Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > New Holland Tractor Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 03-14-2003, 07:45 Post: 51124
Danny Yerks



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 Sensitivity of rear remote hydraulics

I just added a hydraulic side link on my TC29D and tried it out for the first time yesterday. I was disappointed with it because it is way too sensitive. I would move the lever and nothing would happen ... move the lever some more and nothing would happen ... move the lever some more and then it would jerk the 3pt arm too far. Is there some way to adjust the sensitivity of the hydraulic control?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-15-2003, 04:34 Post: 51178
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Sensitivity of rear remote hydraulics

Some flow reduction in the cylinder lines should do the trick. I think that flow reduction parts are fairly standard and most any tractor of hydraulics shop should be able to help. It's also probably a cheap solution since I think that some of the parts to do it are little more than washers with small orifices. However, the flow reduction does go in the cylinder lines (and probably one of them would be sufficient) rather than valve inlet or outlet lines.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-16-2003, 21:06 Post: 51301
mcsd126



Join Date: Jul 2003
Location: Wheeling, WV
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 32
 Sensitivity of rear remote hydraulics

Did you purchase NH rear remotes or another brand? I am wanting to add a remote to the rear of my 29D but the price off $300.oo for NH parts seems a little expensive to me.

-Mike






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-17-2003, 06:00 Post: 51313
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Sensitivity of rear remote hydraulics

Both Prince and Cross were running sales on valve assemblies not that long ago. I think a dealer should offer solutions from after-market manufacturers since they often work well and are less expensive than factory parts. However, for something like a loader, factory equipment is likely to have the mounts and joystick specifically designed for the tractor.

If you look at after-market valves, avoid ones rated for much higher flows than the tractor pump. Large flow rated valves can be very large physically and not at all desirable to mount on a compact.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-23-2003, 07:13 Post: 51668
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

3
Filter by User
 Sensitivity of rear remote hydraulics

That's a good comment. I believe you're right and that I forgot it was a double-acting cylinder where each hose gets a chance to be on the pressure or return side. It's also good to have an estimate of an appropriate orifice size.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-08-2003, 09:27 Post: 54513
Danny Yerks



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 Sensitivity of rear remote hydraulics

Sorry about taking so long to get back on this. I ended up adding 1/32" orifices to both hoses and now it works great. I ordered the 1/2" pipe thread restrictors from Royal Brass in Illinois for total of $11 for both including shipping. They have a web site and their headquarters are in Knoxville, TN. The web site, http://www.royalbrassandhose.com, which has a list of dealers.

The part number is 8MP-8FPXR and it's called a "Restricted pipe SWVL". It doesn't swivel though, once it's tightened down it's rigid. The SWVL means they will swivel while installing, but once they're tight they are rigid, which is fine because the quick connect where it connects to the tractor can swivel anyway to keep the hoses from binding.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > New Holland Tractor Review Forum

Thread 51124 Filter by Poster:
Danny Yerks 2 | mcsd126 1 | TomG 3 |




Most Viewed

+ New Holland TC33D Tractor Frame broke in Half
+ Boomer 8N CVT
+ TN-75 reliability question
+ AG vs Industrial Tires
+ Ls Tractors Rebadged New Hollands?
+ New Holland TC29D rear hydraulics
+ Need advice before Buying Ford NH 1720 tractor
+ NH 7308 LOADER ON , OFF....
+ New Holland TZ25 DA - not feeling the love!
+ TC25 Boomer Vs. Kubota B2400

Most Discussion

+ New Holland TC33D Tractor Fram
+ Liquid Tire Ballast
+ JD 4210 or TC35D????
+ New Holland TC 33D Hydraulics
+ TC 33D Blowing Fuses
+ Lights on ROPS
+ Buying TC34DA
+ Diesel Fuel
+ TC25D rear pto shaft broken
+ Boomer 8N CVT

Newest Topics

+ Tc29da
+ TN75DA Does Not WARM UP
+ new holland Tc 29 da glow plug light on dash
+ TD5050 Hydraulics not working
+ New Holland TC 30 Hydraulics
+ 2006 New Holland TN60-A Transmission The NHTractor
+ TN 75s AC bower
+ TN 75s AC bower
+ backhoe strength
+ backhoe strength













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines