NH1920 w/allied loader need Hydraulic Help: New Holland Tractor Review  -- New Holland Tractors Discussion Forum and Review NH1920 w/allied loader need Hydraulic Help: New Holland Tractor Review -- New Holland Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > New Holland Tractor Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 01-07-2003, 23:17 Post: 47139
Bill>Eug.Or.



Join Date: Jul 2003
Location: Eugene Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5
 NH1920 w/allied loader need Hydraulic Help

I just had a local fabricator attach an Allied loader to my Ford NH 1920 4wd tractor. Although he did a satisfactory job attaching tractor to loader he wasn't my choice for the hydraulic work. I have a dual control valve which is supposed to match the hydraulic pump/system from the tractor. I am replacing the hoses and fittings, but need some guidance on which hoses attach to which location on the hydraulic system. I have some old pictures of a factory set up but they dont show me enough. Can anyone point me in the right direction or send me a picture of their connections?
Thanks in advance.
Regards, Bill






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 01-08-2003, 07:04 Post: 47142
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406
 NH1920 w/allied loader need Hydraulic Help

I'll describe the connections for my 1710.

There is a manifold block on the lower middle of the engine on the right side. The block contains 1/2" NPT ports for auxiliary system send and return and a slot screw control for a diverter valve that selects between remote and auxiliary systems. With the diver valve turned counter-clockwide (top of slot toward rear) the high-pressure send port is to the right (front of tractor). A line runs from that port to the loader valve inlet port (The loader valve port should be stamped either 'IN' or 'P'.

The outlet port on the loader valve runs to the other port on the manifold block. If the loader valve has two ports on its outlet section, it is the port stamped 'PB'. The other outlet may be unmarked or stamped 'T'. That port requires a line that runs to a port on the cases. Location of a port on the cases is variable but it a plug intended to accommodate a fitting should be fairly obvious. If the loader valve has a single outlet port, the valve should be known to be rated for power-beyond applications. Otherwise operation of a loader valve when the 3ph is in lift mode may damage the valve.

For connections to the loader cylinders: There are lift and lower circuits that connect to the opposite ends of the lift cylinders. The lift cylinders are connected in parallel, so there is one lift line and one lower line on a loader. These lines connect to the two ports on the control valve used for the lift circuit. That valve usually has a float feature and is physically longer than the other control valve. Either cylinder port may be connected to the lower line, but it's usual to use the side with the float detend. A similar connection is made for the bucket circuit.

With this hook up, the 3ph and loader will both operate without changing the diverter valve. With a two-outlet loader valve, the 3ph will not operate when a loader valve is open. With a singe outlet valve, the 3ph can lift when a loader valve is open but any load on the 3ph is deducted form the loader capacity. Who knows maybe a picture is worth a thousand words or 388 in this case.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > New Holland Tractor Review Forum

Thread 47139 Filter by Poster:
Bill>Eug.Or. 1 | TomG 1 |




Most Viewed

+ New Holland TC33D Tractor Frame broke in Half
+ Boomer 8N CVT
+ TN-75 reliability question
+ AG vs Industrial Tires
+ Ls Tractors Rebadged New Hollands?
+ New Holland TC29D rear hydraulics
+ Need advice before Buying Ford NH 1720 tractor
+ NH 7308 LOADER ON , OFF....
+ New Holland TZ25 DA - not feeling the love!
+ TC25 Boomer Vs. Kubota B2400

Most Discussion

+ New Holland TC33D Tractor Fram
+ Liquid Tire Ballast
+ JD 4210 or TC35D????
+ New Holland TC 33D Hydraulics
+ TC 33D Blowing Fuses
+ Lights on ROPS
+ Buying TC34DA
+ Diesel Fuel
+ TC25D rear pto shaft broken
+ Boomer 8N CVT

Newest Topics

+ Tc29da
+ TN75DA Does Not WARM UP
+ new holland Tc 29 da glow plug light on dash
+ TD5050 Hydraulics not working
+ New Holland TC 30 Hydraulics
+ 2006 New Holland TN60-A Transmission The NHTractor
+ TN 75s AC bower
+ TN 75s AC bower
+ backhoe strength
+ backhoe strength













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines