Go Bottom Go Bottom

New Holland has you captured as you can t work on electronics withou

View my Photos
nelson
Join Date: Dec 2007
Posts: 4 oklahoma
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-12-09          149141

I made a fatal mistake buying this tractor because if anything on the electronic side fails you must take it back to the dealer. If a code sets on the computer you must take it in to be cleared even after the repairs of a broken wire is completed. I purchased all the manuals for the unit as which are poor as they were not up to date at the time of purchase. I even asked to purchase the software for my laptop computer no was the answer even for the shop analyzer. I feel I paid the extra price for the electronics at least sell me the tools to maintain the thing. The price of fuel to take it back costs more than the Mickey Mouse computer that’s already been replaced once.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-12-09          149142

What happens if the broken wire is fixed and you don't reset the code? Will it eventually clear itself? IMO, any design of consumer equipment should be resilient and not require special intervention after problems are repaired. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-12-10          149167

My understanding was that if you disconnected the battery, then completely drained any residual power by shorting the disconnected terminal to the other one it would clear the memory and reset all the codes.

Maybe Tony (oneace) will chime in on this one.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-12-10          149183

I have an '02 New Holland TC33D and an '05 NH LS 185.b skid steer. Neither has the level of sophisticated electronics you mention. I will agree NH falls way short on technician training---when my skid steer electronics took a dump a week after I had it, the dealer siad they never had been trained nor had any manuals for it. It ttok them a week to find a bad $15 diode.

What machine do you have? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
nelson
Join Date: Dec 2007
Posts: 4 oklahoma
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-12-14          149322

Its there no matter how many weeks the battery is undone ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
nhtractormd
Join Date: Nov 2005
Posts: 1 Kinston, North Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-12-19          149459

What size tractor do you have and what is the problem you are having? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
nelson
Join Date: Dec 2007
Posts: 4 oklahoma
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-12-19          149461

Its a TN75 with shuttle shift . I have took it back 3 times for the clutches to be recalibrated and replaced one ECM.I repaired the 4 wheel interlock wires 2 times. Of course it must go back to clear out the fault codes. this is all in with about 350 hrs on the tractor. If I had the NH software I would be able to clear the codes and adjust the shuttle clutches myself. I consider myself faily savy on electronics and PLC controls and not to bad on mechainical repairs as I still have my certs on heavy truck automotive repair. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
brokenarrow
Join Date: Jan 2004
Posts: 1288 Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-02-10          151217

One of the mods should move this thread to the right area. I see no complaints about JD or Kubota in the price sections for their boards. This goes on too often in the New Holland Price area.
Thank you ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-02-10          151218

Moved to NH Reviews. Where is Oneace?
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
newholland10
Join Date: Feb 2008
Posts: 27 virginia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-02-27          151745

do you have a tn series tractor?i went to school for that .may be i can help you with your trans issues.i still have all my books .the ones the customer does not get.sorry idont have the scan tool but i can tell what all the codes are.and how to clear most of them.be glad to help if i can.because i love my ford/newholland tractor.i will put it up against any tractor.any time.worked on them for over 20 years ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-02-28          151749

Thanks for the heads-up, Nelson. I'm looking for a replacement, and New Holland just went from the top of my list of possibilities to the bottom. They make a fine tractor, but all tractors will need maintenance and servicing, and I like to do whatever I can myself. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
airductz
Join Date: Jul 2008
Posts: 4 partlow va
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-07-24          155617

hello i have a tn75s with about 300 hours i have just recently found it stuck in nuetral prior to this it would start to squeel periodicly after and hours worth of work if you put it in nuetral it would stop squeeling dealer could not find problem . it is flashing a code 54 and another dash light is iluminated any help would be appreciated ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



New Holland has you captured as you can t work on electronics withou

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-07-25          155619

Sounds to me that a transmission bearing is wiped out. Have you checked the fluid level? If it's very low it's probably too late. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login