3-pt on Mitsu D1500: Mitsubishi  -- Other Tractor Brands Discussion Forum and Review 3-pt on Mitsu D1500: Mitsubishi -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Mitsubishi Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-03-2003, 19:58 Post: 54244
Oregonfarmer
2003-05-03 19:58:01
Post: 54244
 3-pt on Mitsu D1500

Have a nice running D1500, but the hydraulics are extremly wee. The pressure gauge reads about 600 and drops to 300.
Other than a weak pump what could the trouble be?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-04-2003, 07:00 Post: 54264
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406
 3-pt on Mitsu D1500

If you have a gauge, you've probably already checked the level, filters and screens and for frothy or hot oil after some operation.

You might say if the pressure was checked at the 3ph cylinder or from a hydraulic manifold block and if the tractor has power steering fed from a priority valve.

A pressure test at a block would be preferable since the only components in the system would be the pump and relief valve. The general idea is to take a pressure reading from the auxiliary system port and rotate the diverter valve just long enough to take a reading. If the pressure is low, inspect the relief valve and increase the pressure adjustment (takes shims on my Ford). Then measure it again to see if the pressure increases. If it doesn't then the pump is a likely cause.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Mitsubishi Forum

Thread 54244 Filter by Poster:
Oregonfarmer 1 | TomG 1 |




Most Viewed

+ Satoh S650G
+ Mitsubishi MT372D
+ front end Satoh Beaver 370
+ What gear should I brush hog in
+ Need help with my Mt 372
+ Hyd pump Satoh Bull Diesel
+ D2350 FD
+ Mitsubishi D1600
+ FS: Mitsubishi MT 372
+ tractor stalls after 1 hour

Most Discussion

+ DONT BUY FROM CORRIHER
+ tractor stalls after 1 hour
+ Need help with my Mt 372
+ Oil Specs
+ front end Satoh Beaver 370
+ MT3201FD Mitsubishi Tractor
+ Mitsubishi MT372D
+ help on cranking
+ Mitsubishi 1600 ignition switc
+ Hyd pump Satoh Bull Diesel

Newest Topics

+ Mitsu D1600 FOR SALE
+ Mitsu 1600 D II For SALE or PARTS
+ d1600 grill
+ Mitsubishi D2000
+ MT372 Front Loader Installation
+ MT372 Front Loader Installation
+ Mitsubushi D2650FD tractor box blade won t lift
+ MT372 for sale in Illinois
+ D1600 voltage regulator
+ Mitsubishi hydraulic screen













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines