Go Bottom Go Bottom

Inverting the front rims for more stability

View my Photos
mrtractorman2000
Join Date: Apr 2006
Posts: 3 california
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-04-30          128575


I just purchased a MT1601D, 4wd with a loader. Can I invert the front rims for more stability??
Jerry S


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Inverting the front rims for more stability

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-04-30          128585

Making the front axle width wider has no appreciable effect on frontend stability. Reason being the loader is connected to the rear axle through the tractor itself---that's where you need stability and weight to counter the weight of the loader and load. Whether you have a wide the axle or narrow, the pivot point remains the same; it's at the center of the front axle which forms a triangle with the rear tires. (Picture if you will a child's teeter-totter--no matter how long or short you make it it still pivots at the same place so niether end is more stable than the other). The only way to get more stability from a wider axle is by having an adjustable, stiff member (such as a hydraulic cylinder) making the pivot point ridgid so that the frame and axle cannot move, similar to waht is found on an off-road telehandler. Also changing the rims around will increase the design load at the bearings and all the other front end parts. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login