Go Bottom Go Bottom

long hydrauliics

View my Photos
tinker
Join Date: Oct 2014
Posts: 7 ill
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-21          196397

My 2260 long I use only for tilling dose not rase tiller as guickly as it should. Had this trouble before cleaned suction screen and that fixed it.This time it did not.If you pull the lever up then push down some it comes up but not as it should. Could use some advice.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



long hydrauliics

View my Photos
jblackwell
Join Date: Jun 2016
Posts: 6 NC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-22          196398

My 2360 has a big honking filter under the fuel pump for the hydraulics. Changing that helped mine a bunch. Also the funky joint below the lift lever needs to be loose (not gummed up) for the lift to work properly. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



long hydrauliics

View my Photos
tinker
Join Date: Oct 2014
Posts: 7 ill
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-22          196399

I will check that but i think it only has a suction screan .Thanks i will let you know. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



long hydrauliics

View my Photos
tinker
Join Date: Oct 2014
Posts: 7 ill
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-25          196411

Changed oil in the long today.And i cleaned and lubed the hydraulics levers and linkage.Works much better'Think i will drain all the hydr out and put in new that may make it even better.And there is only a suction screen filter.Think i will try to get a operater manual for the tractor so can get the right fluids. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login