Go Bottom Go Bottom

RPM guage

View my Photos
bewoodyjr
Join Date: Feb 2012
Posts: 11 Lexington, Alabama
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-05-23          187049

I have a Long 350, still new to me. Was cutting brush when the RPM indicator hand start to fluctuate, then it went to zero and stayed there. Is the indicator hand cable driven, if so is it something I can repair or change, or any other ideas as to what to check??? Any help would be most appreciated. Thanks.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



RPM guage

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-05-24          187056

No idea if electronic or cable driven but you were cutting brush..look for something to have been pulled loose by limb or such catching on it while cutting. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login