BX23 Greese fitting: Kubota Review  -- Kubota Tractors Discussion Forum and Review BX23 Greese fitting: Kubota Review -- Kubota Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Kubota Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-19-2004, 12:25 Post: 86375
jfields22



Join Date: Mar 2004
Location: new hampshire
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 9

2
Filter by User
 BX23 Greese fitting

Before I call the dealer, I thought I would ask the forum. The pin located on the bottom of the FEL bucket cylinder does not have a greese fitting. The other 2 bucket pins have the fitting recessed on the underside and leave no room for the grease gun to attach to it because of lack of space between the fitting and the recessed wall. Are these common problems?

Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-19-2004, 13:09 Post: 86379
Murf

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 1999
Location: Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7012
 BX23 Greese fitting

Pins are normally located in such a way as to prevent damage. Unfortunately this also means a lot of fiddling around to get them all greased too.

I would be very surprised if there was not a grease fitting on those pins, try rotating the bucket and see if they are not just tucked around the back somewhere. On some of the bigger machines they are recessed in the ends of the pins so that access is easier and they are not as exposed to damage.

Any pins that are too difficult to reach should be replaced with 45 or 90 deg. types so as to allow regular greasing.

Best of luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-21-2004, 08:35 Post: 86497
jfields22



Join Date: Mar 2004
Location: new hampshire
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 9

2
Filter by User
 BX23 Greese fitting

Took your advise and rotated the bucket, went through every inch of the center cylinder and there definately is no fitting on the bottom center pin. The outside bucket pin fittings are there and rotating the bucket made it a little easier to access them. The dealer is just down the street so I'm going to seem him later.

Thanks for your help.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Kubota Review Forum

Thread 86375 Filter by Poster:
jfields22 2 | Murf 1 |




Most Viewed

+ Kubota AT70s Rear Tine Tiller
+ Kubota HST GST Shuttle or Gear Transmission?
+ Best Boom Mower for Kubota B2710 Tractor
+ Definition of Tractor Loader Breakout force ?
+ Kubota B3200 vs. JD 2720
+ New Kubota L3240 First Look Review
+ Kubota Transmission Fluid SUDT
+ Kubota BX2230 VS kIOTI CK20HST
+ KUBOTA Tractor Trouble Free Quality
+ kubota bx25 vs john deere 2720

Most Discussion

+ How to match Truck to Trailer
+ New Kubota L3240 First Look Re
+ Kubota Number 1 in Compact Tra
+ KUBOTA Tractor Trouble Free Qu
+ Source for after market produc
+ 3-Point Quick Hitch
+ B 7100 ST - Making the Leap
+ Kubota Transmission Fluid SUDT
+ Kubota vs John Deere Compact T
+ L3130HST vs. JD4310Hydro HELP

Newest Topics

+ Kubota BX2750 Snowblower Fan Shear Pin Alignment
+ Size Kubota for Homeowner Use
+ I need some OEM Quality decals for a B7500 DT-TLB
+ Kubota 4750DT Fuel Venting
+ B1700 Hydostatic unit leaking
+ Kubota B2710 New to meadvice
+ Kubota L4330 three point hitch won t rise
+ Kubota B7200 Hydraulic leak
+ Kubota B6000 How to replace injector pump
+ Kubota L3600 3pt upgrade question













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines