Go Bottom

---

Kubota B6000 locate Spool Valve

jacspecialty Join Date: Feb 2015 Posts: 4 Newton,New Jersey

2015-02-04          192016

Where can I get a new two spool control valve for my B6000

Reply to | Quote Reply | Add Photo

---

Kubota B6000 locate Spool Valve

WillieH Join Date: Feb 2003 Posts: 543 New England   Pics

2015-02-05          192022

Making an assumption here (dangerous), but you are referring to your two spool loader valve, right? And, are we sure the control valve is kaput (?) - as they are typically pricey to change on a whim.

The original valve will probably never be found again as the B6000 is rather old at this point. That said, a conventional two spool valve for a loader control would be readily available and adaptable from several different supply stores. One, your Kubota dealer, though will be potentially rather pricey. Two, TSC, Tractor Supply Company offers several different after market multi spool valves, Three, check ebay or the like for various listings. They are readily available with minor adaptations of fittings and footprints.
Hope this helps.

Willie H ....

Reply to | Quote Reply | Add Photo

---

Kubota B6000 locate Spool Valve

jacspecialty Join Date: Feb 2015 Posts: 4 Newton,New Jersey

2015-02-05          192023

Thanks for the reply.....sounds simple enough. ....

Reply to | Quote Reply | Add Photo

---

Kubota B6000 locate Spool Valve

candoarms Join Date: Mar 2007 Posts: 1932 North Dakota   Pics

2015-02-07          192027

Jacspecialty,

The B6000 has a very low gallons per minute output from the pump. Most of the valves you'll find at TSC (For example) will be designed for tractors with much higher pump outputs.

I'd look for a smaller valve, rated for about 7 gallons per minute. The larger valves are rated for about 25 gallons per minute.

Surplus Center has a good selection to pick from.

Hope this helps.

Joel ....

Reply to | Quote Reply | Add Photo

---

Kubota B6000 locate Spool Valve

candoarms Join Date: Mar 2007 Posts: 1932 North Dakota   Pics

2015-02-07          192028

Jacspecialty,

I found a loader valve that might work for you.

Click on the following link.

This loader valve has an open center, with optional power beyond. Also includes a float position detent. The link also contains a measured drawing as well as instructions for connection to your tractor.

Hope this helps.

Joel ....


Link:   2-Spool single joystick loader valve 10gpm

 
Reply to | Quote Reply | Add Photo

---

Kubota B6000 locate Spool Valve

jacspecialty Join Date: Feb 2015 Posts: 4 Newton,New Jersey

2015-02-07          192035

Thanks for the info Joel.I got on off ebay that is new and very close to what I need.I just need two 90 degree angle fittings to get it to fit without any mods.
JAC ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !