Go Bottom Go Bottom

GR 2110 Diesel

View my Photos
Ronbo10
Join Date: May 2010
Posts: 7 Pittsburgh, PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-05-10          170667

Just looking for an opinion about this unit. I'm thinking of buying one. I did try the simplicity prestige 27HP AWD as well
but is did not feel as powerful or as solid as the kubota. I was alao concerned about which one has the better cut. It will be used almost entirely for mowing.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GR 2110 Diesel

View my Photos
hoppper9
Join Date: Nov 2010
Posts: 2 IL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-11-15          175143

Hi; I do have the 2008 GR2110. I have the 54 " deck. The cut has been great. Just as good as the Simplicity I traded in. The diesel uses a third less fuel. Over all the tractor has been very good. I have a snowblade for the unit too. Moves snow well, however it has a manual lift and angle. I am looking to upgrade it to a hydraulic lift, not sure I can do that with the angle. Good Luck on your investment. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GR 2110 Diesel

View my Photos
Iowafun
Join Date: Jul 2004
Posts: 955 Central Iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-11-15          175157

I have the gas version, GR2010 that I just bought a few weeks ago with the 48" deck. I have been very impressed with the cut on my lawn. Very nice. Really shoots the clippings out the side. So much that it shot hard dog doo across the driveway.

I know that doesn't have anything to do with cut quality, but it is impressive until you have to go clean it up or your wife yells at the dog for pooing in the driveway.

I've only had it for 2 weeks, but I cannot complain about the cut quality. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GR 2110 Diesel

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-11-21          175286

Off topic hijack: iowa, your private mail is not on and I couldn't find the pertinant post about my skid steer pivot pins, but here's numbers of two (quantities unknown) 86640780 cost $297 each. And 86530214 (qty ?)$260 each.

If you can, please see if thses are available on your end at a better price. Thses were for correcting factory defect in the boom arms hitting the cab and engine cover. Thanks. My direct email is earthwerksunlimited@gmail.com ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login