Go Bottom Go Bottom

Kioti Hydraulic hose fittings

View my Photos
dannyjkelly
Join Date: Nov 2009
Posts: 3 Nashville, tn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-09-04          173728

I need to change a steering hydraulic line. Two years ago I remember none of the hydraulic shops had matching fittings.
What is the size these line s& fittings?


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kioti Hydraulic hose fittings

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-09-04          173730

You may not get the answer to your question here but the local Kioti dealership makes up hyd hoses. The local shop I use has all kinds of hyd fittings. If you are using the rubber type hoses would be surprised if they did not stock them. It metal tubing then you probably are right.

I have to use the fittings off of my old tubing on a Volvo brand and you might also if tubing. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kioti Hydraulic hose fittings

View my Photos
washington2
Join Date: Dec 2010
Posts: 4 washington state
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-12-03          175516

jic #5 most good hose shops will have it. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kioti Hydraulic hose fittings

View my Photos
marilynn
Join Date: Aug 2011
Posts: 2 Greater City of Sudbury
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-23          179982

The power Steering hose on a Kioti 65 is -6 with a BSP fitting size of -6 with a thread pitch of 19 TPI, and inside measurement of female swivel is 19/32" ID. The male fitting will measure 21/32". This is an inverted flare type fitting of 30 degrees on the inverted flare.
When you are really stuck for the proper fitting, one can carefully cut the sleeve off of the damaged hose and threaded fitting. You can then use the original threaded fitting on a new hose and compression sleeve. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login