Go Bottom Go Bottom

LK 3054 Broken front axle housing

View my Photos
doorguy
Join Date: Aug 2010
Posts: 3 Taos, NM
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-08-15          173151

I've had the tractor for approx 40hr (8 mo.) and the front pivot is broken off the casting. Just wondering if anyone else has had this problem. The tractor will run if I don't hit a rut too hard. The spindle broke in sort of a rounded shape, so it will stay in if I'm cautious. 4 wheel drive does not work. I'm looking for a good parts department also.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



LK 3054 Broken front axle housing

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-08-16          173155

A casting can sometimes be welded depending on a lot of things like where the break is, the type of metal, if there is room enough to get to the break, etc.
A check of Google should find you a dealer.
Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



LK 3054 Broken front axle housing

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-08-16          173161



Frank, thats an area with everyone trying to steer with brakes that I'd say to replace the housing! I don't recommend it although some manufacturers promote it I've seen the results of it and it's not cheap in the long run.

To have the axle welded with cast it would never be as strong as a good casting should be as cast iron is quite brittle when welded. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



LK 3054 Broken front axle housing

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-08-16          173165

Art;
Yes, I was taking a shot in the dark, just maybe giving the man an option to consider.
It's hard to recommend something when it isn't in front of you to look at. I've welded a bit of cast even an engine block or two but strenght wasn't thwe primary concern there, mainly keping the oil on the inside and the dirt on the outside.
Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



LK 3054 Broken front axle housing

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-08-16          173166

Curious, not under warranty? I am assuming you bought it new. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



LK 3054 Broken front axle housing

View my Photos
doorguy
Join Date: Aug 2010
Posts: 3 Taos, NM
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-08-16          173172

I bought it with 600 hrs on it. I got a quote of $600 for the part which seemed OK, but it came with a $300 shipping charge--not OK. Hopefully there is something better. I got the dealer names from this site in Texas and Kansas and will try them. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login