JD4200 Hydro Trans. Grinding: John Deere Review  -- John Deere Tractors Discussion Forum and Review JD4200 Hydro Trans. Grinding: John Deere Review -- John Deere Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-21-2000, 10:30 Post: 19023
Forrest D. Goings



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 JD4200 Hydro Trans. Grinding

I have a 4200 Hydro. with about 130 hours. The dealer has serviced it twice for transmission grinding. When pulling a plow or digging with the loader... My wheels will basically stop turning and the transmission grinds/vibrates. I am on the second transmission. Tractor is about to go into service for the third time.Anyone else having this type of problem??






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-21-2000, 12:48 Post: 19027
Brent B



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 JD4200 Hydro Trans. Grinding

I just had a transmission replaced in a 4200 because two bearings had gone out
I was also getting the grinding noise in reverse, but the main symptom was
sometimes freewheeling and sometimes the hystat would grab when coming to a
stop. In B range you should be able to creep forward smoothly, and I couldn't do that. Can you?

Brent






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-21-2000, 12:54 Post: 19028
Forrest D. Goings



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 JD4200 Hydro Trans. Grinding

Would your wheels actually stop turning??? My tractor justs grinds and does not turn the wheels over.

When I'm not pulling or pushing something with a lot of resistance... It works fine. Moving forward slowly is fine in any position (A,B or C).

I do notice some noise at the lower speeds though.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-22-2000, 08:14 Post: 19056
Brent B



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

2
Filter by User
 JD4200 Hydro Trans. Grinding

No, I always could generate good pulling effort, and the wheels would never stop while under load. You've got something wierd going on. Good luck.

Brent






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 09-07-2000, 09:40 Post: 19548
Forrest D. Goings



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1

3
Filter by User
 JD4200 Hydro Trans. Grinding

Well... here is what was happening..

I had my wife video tape the problem as it occured. I hooked up the loader and pushed a large dirt pile. Large enough that the tires would spin. From the tractor seat... I could see my right tire stop turning and a grinding noise would come from the transmission area of the tractor below the seat.

When I looked at the video... I could see that my right tire would stop turning but the wheel would continue to turn. The rim had come loose from the tire. I assume the imbalanced tourqe (left wheel still getting traction) is what causes the transmission to grind.

The Deere repair shop was happy to see that I found the problem. They have the tractor now which will probably need another transmission... And a new tire/wheel of course!!

I hope all will be O.K. after this...








Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 09-07-2000, 11:29 Post: 19550
ayacht



Join Date:
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1
 JD4200 Hydro Trans. Grinding

When I let off the pedal on my 4300 quickly the hydro will grab and stop the tractor quickly like the jerking you describe. If I let off the pedal slowly it will ease to a stop. This seems to be normal operation to me. I don't know if that helps with your hydro jerking problem. You should be able to pull, push and dig pretty well. I have yet to pick too big of a job for ours.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Thread 19023 Filter by Poster:
ayacht 1 | Brent B 2 | Forrest D. Goings 3 |




Most Viewed

+ John Deere 2210 Backhoe Review
+ John Deere vs Kubota Compact Tractors
+ John Deere 790 fuel shut-off solenoid failing???
+ John Deere low viscosity HY GARD
+ John Deere JD 4100 Wiring diagram
+ JD 790 or Kubota L3000DT
+ Should I buy a John Deere 4105???
+ John Deere 4300 turns over but won't start
+ John Deere 455 garden tractor
+ Oil Change for Diesel Tractor

Most Discussion

+ John Deere 4300 scuffing......
+ Possible Solution To The 4000
+ Dealer out to lunch
+ Just got my new JD 4410 - Prob
+ Hello Green, Goodbye Orange
+ Receiver hitch for iMatch
+ 4300 wheel bolt problems
+ 4000 Ten Series 50 hour break
+ Don't buy JD compact tractors.
+ Oil Change for Diesel Tractor

Newest Topics

+ Oil overflow from tube and Smoke
+ John Deere 4100 gear 3 point not workin
+ 2000 John Deer Gator 4 X2
+ Mini Excavator SY20C - Small Body with Big Power
+ John Deer 1070 starting problem
+ John Deere 990
+ Tractors R Us
+ john deere 4100 with 410 loader hydraulic problem
+ John Deere 2032R Buying advice
+ John Deere 2010 loss of hydraulics













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines