JD 4310 WILL NOT MOVE.: John Deere Review  -- John Deere Tractors Discussion Forum and Review JD 4310 WILL NOT MOVE.: John Deere Review -- John Deere Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-24-2009, 17:04 Post: 165214
mvswarren



Join Date: Aug 2009
Location: Morganton, Ga.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 JD 4310 WILL NOT MOVE.

I PULLED MY 4310 UP TO MY SHED TO LOAD CORN IN THE BUCKET TO FEED THE DEER. I PUT THE BRAKE ON, LEFT THE TRACTOR RUNNING, PUT THE CORN IN THE BUCKET, GOT BACK ON AND PUSHED THE REVERSE PEDDLE AND THE TRACTOR WOULD NOT MOVE. IT IS A EHYDRO. SO IT HAS THE SEPERATE FORWARD AND REVERSE PEDDLES. CAN SOME ONE HELP?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-24-2009, 17:44 Post: 165216
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

4
Filter by User
 JD 4310 WILL NOT MOVE.

There is a diagnostic light on the console to the right of the seat. Is it flashing a code? Should be a four flash sequence made up of long and/or short flashes in a pattern that repeats. Post back what it's doing and it may point to the problem.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-24-2009, 17:48 Post: 165217
mvswarren



Join Date: Aug 2009
Location: Morganton, Ga.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 JD 4310 WILL NOT MOVE.

WHEN I LOOKED AT IT SATERDAY I SAW TW0 SHORT, AND TWO LONG.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-24-2009, 18:07 Post: 165218
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

4
Filter by User
 JD 4310 WILL NOT MOVE.

Two short, two long is sensor supply voltage out of range. Unfortunately the tech manual doesn't say which sensor, there's a few of them. First thing is to check fuses and relays, maybe reseat them in the panel. Also there are some wire harnesses that run beneath the tractor. Sometimes these catch on sticks or brush and connections are torn loose. Could be there was a wire hanging by a thread that let go. It would be worth crawling underneath and following the visible harnesses to see if there's any loose or broken wires.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-24-2009, 18:16 Post: 165220
mvswarren



Join Date: Aug 2009
Location: Morganton, Ga.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3
Filter by User
 JD 4310 WILL NOT MOVE.

LAST WEEK MY PTO QUIT. I FOUND A MESSAGE THAT WAS SIMULAR, IT WAS DATED 5-31-09. BY READING IT, I FOUND THE WIRE TORN FROM THE PLUG THAT HITS BOTH SILANOIDS. I REMOVED THE SILANOIDS AND REPAIRED THE PLUG. THAT WORKS FINE NOW. WERE OR WHAT LOCATION UNDER THE TRACTOR SHOULD I LOOK FOR A WIRE PARTAINING TO THE PETTLES? FROM DAY ONE, THERE ARE WIRE PLUGS ON THIS TRACTOR THAT HAVE NEVER HAD A WIRE PLUGGED INTO IT. THANKS.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-24-2009, 19:49 Post: 165223
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

4
Filter by User
 JD 4310 WILL NOT MOVE.

There are forward and reverse potentiometers at the base of the pedals but there's a different fault code for those.

It looks like there are two sensors that may be affected, the flywheel speed sensor and the MFWD speed sensor. If the MFWD is engaged you might try disengaging that and seeing if the tractor will move.

From the small picture it looks like the flywheel speed sensor connects to the main wiring harness under the tractor. There is a tee in the main wiring harness that ends in a three wire connector. This connects to another connector that comes from the flywheel speed sensor. I could be wrong, it's hard to tell, so if you don't see something like this you might look at the back of the engine in the flywheel area for a sensor and follow it to the main harness.

It looks like the MFWD sensor connects to the main wiring harness underneath by the front power steering cylinder. Again there is a tee with three wires leading to a connector that leads to the MFWD sensor.

Good luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 08-25-2009, 12:09 Post: 165253
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

4
Filter by User
 JD 4310 WILL NOT MOVE.

Sorry, I gave you some bad information.

The MFWD sensor for eHydro is located in the area on the left side of the seat but it's hard to say if it's above the floorboord or underneath.

The flywheel speed sensor is located somewhere under the fuel gauge sensor.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Thread 165214 Filter by Poster:
kwschumm 4 | mvswarren 3 |




Most Viewed

+ John Deere 2210 Backhoe Review
+ John Deere vs Kubota Compact Tractors
+ John Deere 790 fuel shut-off solenoid failing???
+ John Deere low viscosity HY GARD
+ John Deere JD 4100 Wiring diagram
+ JD 790 or Kubota L3000DT
+ Should I buy a John Deere 4105???
+ John Deere 4300 turns over but won't start
+ John Deere 455 garden tractor
+ Oil Change for Diesel Tractor

Most Discussion

+ John Deere 4300 scuffing......
+ Possible Solution To The 4000
+ Dealer out to lunch
+ Just got my new JD 4410 - Prob
+ Hello Green, Goodbye Orange
+ Receiver hitch for iMatch
+ 4300 wheel bolt problems
+ 4000 Ten Series 50 hour break
+ Don't buy JD compact tractors.
+ Oil Change for Diesel Tractor

Newest Topics

+ Oil overflow from tube and Smoke
+ John Deere 4100 gear 3 point not workin
+ 2000 John Deer Gator 4 X2
+ Mini Excavator SY20C - Small Body with Big Power
+ John Deer 1070 starting problem
+ John Deere 990
+ Tractors R Us
+ john deere 4100 with 410 loader hydraulic problem
+ John Deere 2032R Buying advice
+ John Deere 2010 loss of hydraulics













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines