Hydraulic valve repair-48 backhoe: John Deere Review  -- John Deere Tractors Discussion Forum and Review Hydraulic valve repair-48 backhoe: John Deere Review -- John Deere Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 10-16-2005, 18:30 Post: 117982
cekramer



Join Date: Aug 2004
Location: cave junction, or
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 20

2
Filter by User
 Hydraulic valve repair-48 backhoe

I have a slight leak in the backhoe control valve. Have cleaned and watched for where the drip is coming from but can only narrow it down to 2 valve sections. Has anyone done their own control valve disassembly and repair? Seems like a job just to get the whole valve assembly out. This leak seems to occur more when I shut the system down rather than when I am using it. Sort of surprising. I am guessing it is in the relief valve or in the return line path.

Ideas, comments, look out fors all welcomed.

Chuck






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-18-2005, 03:34 Post: 118075
harvey



View my Photos

View my Photos  Pics
Join Date: Sep 2000
Location: Moravia, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1525

2
Filter by User
 Hydraulic valve repair-48 backhoe

Chuck

It is a process to pull the main block out of the bottom. It is dooable. I have had mine out and switched the boom and dipper blocks around to function the same as a excavator.

I spend a lot of time in the big machines and when I am in close work with the little JD hoe it was not instictive and I had to overconcentrate. Also do not just switch hoses because the blocks have different relief valves on the push/pull sides.

Put a number tag on each line and make a diagram of how they go.

Common tools will do the job but you will need a good quality set of open end wrenches for all the lines.

I have all the rebuild parts and photos and can fax or can send you links to the JD sites.

Just an after thought check all the lines first. A couple of mine were not tight but did not leak that I noticed.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-18-2005, 10:30 Post: 118091
cekramer



Join Date: Aug 2004
Location: cave junction, or
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 20

2
Filter by User
 Hydraulic valve repair-48 backhoe

Thanks Harvey.

Just wondered if your felt you needed caps or plugs to seal off the free hose ends and input connectors to the valve block while you removed and worked on it?

Chuck






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 10-19-2005, 04:15 Post: 118149
harvey



View my Photos

View my Photos  Pics
Join Date: Sep 2000
Location: Moravia, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1525

2
Filter by User
 Hydraulic valve repair-48 backhoe

I streched out boom and dipper, also the stabilizers so everything was flat on the floor. Recheck every thing to make sure you do not have some stored energy somewhere in the system. Work "ALL" of the valves with tractor "NOT" running then un hook hoses from tractor.

Just used a small drain pan and speedy dry. Unhooking all the control linkages as I recall was the most difficult part. Can't remember why just seems like it was the headache. Maybe because of the sheet metal in the way.

Once you get the big plate off the back you have complete access.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Thread 117982 Filter by Poster:
cekramer 2 | harvey 2 |




Most Viewed

+ John Deere 2210 Backhoe Review
+ John Deere vs Kubota Compact Tractors
+ John Deere 790 fuel shut-off solenoid failing???
+ John Deere low viscosity HY GARD
+ John Deere JD 4100 Wiring diagram
+ JD 790 or Kubota L3000DT
+ Should I buy a John Deere 4105???
+ John Deere 4300 turns over but won't start
+ John Deere 455 garden tractor
+ Oil Change for Diesel Tractor

Most Discussion

+ John Deere 4300 scuffing......
+ Possible Solution To The 4000
+ Dealer out to lunch
+ Just got my new JD 4410 - Prob
+ Hello Green, Goodbye Orange
+ Receiver hitch for iMatch
+ 4300 wheel bolt problems
+ 4000 Ten Series 50 hour break
+ Don't buy JD compact tractors.
+ Oil Change for Diesel Tractor

Newest Topics

+ Oil overflow from tube and Smoke
+ John Deere 4100 gear 3 point not workin
+ 2000 John Deer Gator 4 X2
+ Mini Excavator SY20C - Small Body with Big Power
+ John Deer 1070 starting problem
+ John Deere 990
+ Tractors R Us
+ john deere 4100 with 410 loader hydraulic problem
+ John Deere 2032R Buying advice
+ John Deere 2010 loss of hydraulics













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines