Farmpro 2425 PTO slipping
Daves262
Join Date: Apr 2016 Posts: 4 West Virginia Pics |
2016-04-22 195015
When using an auger or tiller attachment the PTO slips or comes to a stop. The clutch seems to operate and function fine driving but only when under load it does this. When my dad had the tractor he was brush hogging one day and said he raked or ground the PTO engagement real bad one day on accident and that is when this problem started occuring. Could this be a clutch issue or something in the gearbox broken or sheared? I am very new to owning a tractor, so any help or insight would be greatly appreciated. Thank you in advance.
Reply to | Quote Reply | Add Photo
Farmpro 2425 PTO slipping
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2016-04-23 195018
Not a mechanic but you can tear up the pto clutch without damaging the clutch for the gears or pulling. You should have a pto shaft with a clutch that slips especially on a rough cut mower that will slip when such happens or with a shear pin. You may be able to adjust the pto clutch but do not run it if slipping. It will only make it worse. kt ....
Reply to | Quote Reply | Add Photo
Farmpro 2425 PTO slipping
Daves262
Join Date: Apr 2016 Posts: 4 West Virginia Pics |
2016-04-27 195060
Thanks for the reply! It does'nt seem to be a slip clutch issue, it does it with a tiller attachment and also a post auger attachment both with different drive shafts, and both pieces of equipment work without any issues on my dads kubota. I will look into adjusting the pto clutch and see if that helps. I still just cant help but wonder if something like a shifting fork or a pin type something broke in the "PTO engage" system not allowing it to engage all the way or possibly be letting it try to disengage. Any other ides or suggestions are greatly appreciated and respected.Thanks! ....
Reply to | Quote Reply | Add Photo
Go Top
Share This