AGRACAT 2940 super 3 point hitch problems: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review AGRACAT 2940 super 3 point hitch problems: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 06-22-2013, 15:12 Post: 187444
snakedoctor



Join Date: May 2013
Location: Azle Tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 8
 AGRACAT 2940 super 3 point hitch problems

I took time today to try and trouble shoot my 3 point lift problems. It still seems that there is no fluid circulating to the back. I loosened the filter off and instead of spraying it just dripped. Do I need to loosen every connection to find where the blockage is at? I have power steering. It seems a bit week or sluggish. WHAT DO YOU GUYS SUGGEST?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-23-2013, 08:34 Post: 187448
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

2
Filter by User
 AGRACAT 2940 super 3 point hitch problems

Please confirm: manual steering or power steering?

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-23-2013, 23:29 Post: 187922
arcountryboy



Join Date: Aug 2013
Location: Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2
 AGRACAT 2940 super 3 point hitch problems

I have an Agracat 2940 Super and I struggled with this for a while and I finally feel like I overfilled the hydraulic fluid but it works well now. The dipstick has two lines on it. If you fill til the fluid shows near the top line WITHOUT threading the dipstick in that is where I fill to.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-24-2013, 07:04 Post: 187924
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

2
Filter by User
 AGRACAT 2940 super 3 point hitch problems

Concur. Missed the word "power" in your opening post, sorry 'bout that.

This is not a common sump machine where the same fluid is shared by both gears trains and hydraulics. Gear goes into the fill hole on the transmission, which subsequently flow rearward to the differential and forward to the mid-connect (shuttle or creeper) box. Gear oil is also used in the front differential.

But the hydraulics (lift and steering) require proper hydraulic fluid, which is contained in a sump directly beneath the operator seat. Push the seat all the way forward on the rails, you'll see the fill point in the top rear. Unscrew dipstick, wipe, reinsert - but don't screw it back in. Just set it in the hole, then pull it out to check the level. When clean, it's hard to see, so you might want to lay it on a clean cloth or paper towel. The oil transfer will show you how much is on the dipstick. The dipsticks with two lines are self-explanatory. If you have one with a single line, consider that the full mark. On mine I never added fluid unless/until my (one line) dipstick came out dry.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 187444 Filter by Poster:
arcountryboy 1 | greg_g 2 | snakedoctor 1 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping
+ Farmpro 2425 PTO slipping
+ Nortrac 254 won t Start













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines