QUICKLIE Jinma 180 PS Filler: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review QUICKLIE Jinma 180 PS Filler: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-20-2013, 16:29 Post: 186996
corvettteguy



Join Date: Jun 2010
Location: NE PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 QUICKLIE Jinma 180 PS Filler

Lost my Chinese manual. Power steering not functioning.
I suspect low fluid. Tried to turn knob under seat but
will only turn about 2 turns, Is this the PS filler?
If not where is it?

Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-21-2013, 07:17 Post: 187004
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 QUICKLIE Jinma 180 PS Filler

That knob varies the rate at which the rear lift drops. Power steering gets its fluid from the hydraulic fluid sump under the seat. Fluid is diverted to the steering by a priority valve that's located just forward and to the left of the brake pedals. That valve often gets dirty, subsequently failing to route fluid to the steering. .

One indicator that it's the PV is to try and steer and operate the rear lift at the same time. If that works, the problem is likely that valve. Removal/disassembly/cleaning/reinstallation is the usual remedy

Another common problem is cylinder bypass. That's when you turn the steering wheel and nothing happens, regardless of whether the engine's running or not. The steering wheel turns continuously in both directions, but the front tires don't budge. That's usually fixed with an inexpensive steering cylinder repair kit.

//greg//








Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-21-2013, 14:38 Post: 187009
corvettteguy



Join Date: Jun 2010
Location: NE PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 QUICKLIE Jinma 180 PS Filler

I have major feed back on the steering wheel.
I tried lostening the 2 hoses to the cylinder
and when turning wheel I get slow flow.
I will try the turn and use the lift at the same time
to see if it gets easier. Then I will have to
remove the PV and clean it out.
I'll let you know.
Thanks.
George






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-21-2013, 18:07 Post: 187013
corvettteguy



Join Date: Jun 2010
Location: NE PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 QUICKLIE Jinma 180 PS Filler

Question on the PV

Does the cylinder shaped housing contain the
pressure switch? Can I remove the bolt without having
a spring shoot out.
I plan on using some diesel fuel to clean the chambers out.
What about carb cleaner?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-23-2013, 07:42 Post: 187030
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 QUICKLIE Jinma 180 PS Filler

It can be disassembled without much drama. Just knowing there's a spring inside should arm you with sufficient caution. As for cleaning, I prefer kerosene. It cleans better than diesel fuel, and doesn't strip paint like carb cleaner or brake cleaner.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-24-2013, 08:48 Post: 187055
corvettteguy



Join Date: Jun 2010
Location: NE PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 QUICKLIE Jinma 180 PS Filler

Thanks

I did not remove the PV or the pressure switch
on this first go round. I use carb cleaner inside
and flushed it out a few times. I loosened the
hoses to the cylinder and bled out the fluid turning
the steering left and right. I then held the wheel in one
direction and tightened the hose.
Steering is not where it was but it is improved.
I will bench clean the PV when I get down time.

What type of hydraulic fluid should I use?

What type of trans fluid?

Thanks

George






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-14-2013, 17:49 Post: 187327
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

3
Filter by User
 QUICKLIE Jinma 180 PS Filler

AW32 or ISO32 hydraulic fluid is appropriate






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-14-2013, 21:53 Post: 187330
snakedoctor



Join Date: May 2013
Location: Azle Tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 8
 QUICKLIE Jinma 180 PS Filler

Not that Im aware of. Im still learning about my tractor






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 186996 Filter by Poster:
corvettteguy 4 | greg_g 3 | snakedoctor 1 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping
+ Farmpro 2425 PTO slipping
+ Nortrac 254 won t Start













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines