Farmboss 284 FEL Hydraulic problems: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review Farmboss 284 FEL Hydraulic problems: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 04-04-2011, 07:38 Post: 177773
jebass



Join Date: Mar 2011
Location: florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

I have a farmboss 2004 284 FEL I was working the tractor find. Then when I got ready to put it up,I notices the FEL won't lift up unless I gave it alot of throttle and now it wont go up at all but the 3 ph does but I have to give it throttle to with no load on either of them.The control valve for the FEL is leaking a little but all the fluid levels are good.Does this mean a bad hydraulic pump?.And If so where is the best place to get one.Or could the leak be causing the system to have to much air in it causing it not to work and if so how do you bleed the system.The arms will go down and it will curl up as well but not go up or curl up.Or is it just a bad valve ? THXS jebass






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-04-2011, 14:57 Post: 177780
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

If your steering is affected too, it could be the pump. Sounds more like the loader control valves thouth. It also wouldn't hurt to remove/disassemble/clean/replace the priority valve. In some circles it's called the diverter valve. In any case, it should be just a little ways in front and to the left of the brake pedals.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-11-2011, 08:20 Post: 177895
jebass



Join Date: Mar 2011
Location: florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

Well I don't know if this is just a fluke but when I adjusted the needle valve underneath the FEL control valve the loader started going up and working great.But thxs for the replies.Jebass






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-27-2012, 07:54 Post: 185025
jebass



Join Date: Mar 2011
Location: florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

Ok guys thxs for the help,More of the same if I turn the sterring I can get the loader to go up.I dont have a manual can u send me a photo of this priority valve.So I can see what it looks like.So the problem is this loader works some times,and when it stops I can turn the sterring one way and make it go up. thxs






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 09-27-2012, 10:18 Post: 185030
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

No need for a photo. It's on the right side of the tractor, just forward and to the left of the brake pedals. Typically black; one hose in, two hoses out. One output to the rear lift, one output to the steering. Disconnect all three hoses, remove PV, disassemble/clean, replace PV, reconnect all three hoses. System is vented, so there should be no reason to have to re-prime. You might have to replace whatever fluid was lost though.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 10-08-2012, 08:26 Post: 185131
jebass



Join Date: Mar 2011
Location: florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 17

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

It seams that cleaning that value worked for now just wanted to say thanks guys.But i do have a question what is the big nut on the bottom of the FEL control boxs for, is that a needle value and how should it be set or what is the steps to set it.and what is its purpose.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 10-08-2012, 13:02 Post: 185134
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

If it's a Chinese loader, I'd say that's a dealer question. But if it's an American aftermarket loader, we might be able to help.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-13-2014, 14:07 Post: 190064
paquette1963



Join Date: Apr 2014
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4
 Farmboss 284 FEL Hydraulic problems

I have similar problem and I am very new to tractors. I can't get the brush hog hydraulics to lift and the front loader goes up very slow and sometime not at all. I have replaced the filter and assured that the fluid is full. I'm 100 miles away from the tractor with no internet on site. I'm asking if only the front loader moves and the brush hog will not move is this a pump issue?

Thanks Chuck






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 04-14-2014, 07:09 Post: 190068
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 Farmboss 284 FEL Hydraulic problems

Welcome to the forum Chuck, I'm going to suggest that you start a topic of your own. Near the top left of the page is where you click to "Start a New Topic". Describe the make/model/year of your tractor, and describe the issue in a bit more detail. Right now it sounds like you have a front loader (FEL) that's working poorly, and a rear lift that's not working at all.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 177773 Filter by Poster:
greg_g 4 | jebass 4 | paquette1963 1 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping
+ Farmpro 2425 PTO slipping
+ Nortrac 254 won t Start













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines