Fuel Line Part Needed Close to home.: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review Fuel Line Part Needed Close to home.: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-07-2007, 10:10 Post: 141872
yofrient



Join Date: Apr 2007
Location: AR US
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 19

2
Filter by User
 Fuel Line Part Needed Close to home.

I have an Agracat 254 and need part # Y385T-1-10600 Line from filter to injection pump (the old one is cracked). On the parts sites (JMparts and Affordable), it looks like the replacement part is now a hose. Is there something I can get from NAPA or CB that will be a suitable replacement (those are my 2 local parts places and would be most convenient), if not where in Arkansas is there a parts source, and if not, I don't mind ordering Internet but would like to start a little closer to home and have ready for the weekend.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-07-2007, 10:13 Post: 141873
Murf

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 1999
Location: Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7018
 Fuel Line Part Needed Close to home.

In most cases if you take the old line to any good shop that does big truck repairs, or injector pumps, etc., they will make you one up.

It is just a piece of line with fittings on each end.

Best of luck.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-07-2007, 10:53 Post: 141874
yofrient



Join Date: Apr 2007
Location: AR US
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 19

2
Filter by User
 Fuel Line Part Needed Close to home.

Thank's murf. I'll try a place nearby with that in mind. I wasn't sure if those ends were standard type ends or special Chinese metric parts only available from the factory. I'm new to this so I don't know.

How do I get in contact with Chip. I just did a little more digging and saw that he is in Arkansas. Chip are you out there?

UPDATE: THANK YOU MURF! He's just a hop skip and a jump away. Practically Local.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-07-2007, 17:58 Post: 141906
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

2
Filter by User
 Fuel Line Part Needed Close to home.

Chip's an honest guy, and will be more than happy to sell you a new one. But if you ask him, he'll probably advise to go with the original recommendation about getting one local. What he sells will be Chinese OE - same low grade rubber - just as likely to go bad on you as your first one. The original advice about taking it to a hose shop is good. But - the fittings are not very common. Take the bad hose with you, let them re-use the fittings with a new piece of hose.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-07-2007, 18:06 Post: 141907
chipuren



Join Date: Jul 2003
Location: Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 193
 Fuel Line Part Needed Close to home.

I'm here! The only lines that are high pressure are the steel lines that run from the pump to the injectors themselves, the lines from the sediment bowl to the filter and from the filter to the pump can be replaced with standard fuel line. You can make your own, just grind off the crimping band on the banjo fittings and pull the fitting off the old hoses, It doesn't have a barb but it does have a couple grooves cut in it that wil help a standard hose clamp seal.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 05-07-2007, 18:12 Post: 141908
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

2
Filter by User
 Fuel Line Part Needed Close to home.

I rest my case !

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 141872 Filter by Poster:
chipuren 1 | greg_g 2 | Murf 1 | yofrient 2 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ Agracat 3720 Magnum Clutch Issues
+ farm pro 2420
+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines