drive shaft: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review drive shaft: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] | 2 | | Next >>
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 03-04-2007, 20:51 Post: 140195
cdeasy



Join Date: Feb 2007
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 15

7
Filter by User
 drive shaft

What is the best way to remove the front wheel drive drive shaft?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-04-2007, 22:10 Post: 140198
chipuren



Join Date: Jul 2003
Location: Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 193

4
Filter by User
 drive shaft

The best advice is to do it on a clean floor or put a blanket under the tractor to catch the ball bearings that will likely fall out. Loosent the clamps on the rubbe boot in the middle of the cover and collaps the cover away from the ends of the shaft. One end will have a spring, push the shaft toward the spring and lower the other end. each end of the shaft has a collar with 6 (as I recall) ball bearings between the shaft and the collar, similar to a cv joint.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-05-2007, 19:30 Post: 140225
cdeasy



Join Date: Feb 2007
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 15

7
Filter by User
 drive shaft

Worked for me, Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-08-2007, 06:39 Post: 140289
chipuren



Join Date: Jul 2003
Location: Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 193

4
Filter by User
 drive shaft

I take it the noise was not caused by a dislocated push rod?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-08-2007, 20:00 Post: 140309
cdeasy



Join Date: Feb 2007
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 15

7
Filter by User
 drive shaft

I checked the push rod and they were all fine. I emoved the pan and foubd a rod bearing spun. Replaced those, put it back together and still the same noise. I filled the oil but noticed it does not show on the stick. Where could the oilhave gone????? No leaks and plug in place. Did not se an oil pump ,where is it located/ These may be dumb questions, First time working on a diesel engine.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-09-2007, 09:10 Post: 140315
chipuren



Join Date: Jul 2003
Location: Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 193

4
Filter by User
 drive shaft

Ooh, sorry to hear that. Often when a bearing spins it takes the crank out with it, but oil pressure would be low in that case. The oil pump is driven off the timing gears and is under the front timing cover.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-09-2007, 18:37 Post: 140336
cdeasy



Join Date: Feb 2007
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 15

7
Filter by User
 drive shaft

the book that came with the tractor specifies 4.5-6 liters of oil. At 6 quarts it still dont show on the stick. How much should it hold?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-10-2007, 07:35 Post: 140346
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 drive shaft

Quite a few Jinma 200 series owners have asked this question. But first I should point out that liters and quarts don't have a 1:1 ratio. 6 liters is closer to 6-1/2 quarts. And that's just the sump capacity, you have to consider the filter as well. I believe both my Y385s ~7.3 quarts (to include filter).

Additionally, it seems that YangDong for some reason fits two different oil pans to the Y385 engine. That's probably why your book indicates 4.5 to 6.0 liters. To compound the issue, the 4.5 dipstick could be stuck into the 6.0 oil pan or vice versa.

So let's start by finding out more info about your engine. What does it say on the engine label?

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-10-2007, 10:53 Post: 140348
cdeasy



Join Date: Feb 2007
Location: missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 15

7
Filter by User
 drive shaft

The label says TY 395I






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 03-10-2007, 13:11 Post: 140351
greg_g



View my Photos

View my Photos  Pics
Join Date: Jan 2004
Location: Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1816

4
Filter by User
 drive shaft

Oh, then you apparently don't have a 200 series. My mistake. That engine never went into the 200 series, and opens a whole nuther kettle of fish. What make/model of tractor are we actually talking about here?

If it's a 300 series, then definitely you need over 7 quarts. The sump itself holds nearly six and a half, and the larger capacity JX85100 filter takes probably close to another quart by itself

And again, consider that you might have gotten the wrong dipstick.

//greg//






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] | 2 | | Next >>

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 140195 Filter by Poster:
cdeasy 7 | chipuren 4 | greg_g 4 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ Agracat 3720 Magnum Clutch Issues
+ farm pro 2420
+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines