PTO problem: Chinese Tractors -- Jinma Farmpro Agracat  -- Chinese Tractors Discussion Forum and Review PTO problem: Chinese Tractors -- Jinma Farmpro Agracat -- Chinese Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 06-07-2006, 19:25 Post: 130618
mscpilot



Join Date: Jul 2005
Location: Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 30

3
Filter by User
 PTO problem

Ok guys your not going to beleive this one. My PTO stopped working, so after getting some advice I opened up the casing and took a look at the gears. Everything looked fine and with my hand I could manually make all the PTO gears work. After putting things back in there places and reseating the case. I started the moter and nothing. So after a nights sleep I went out and played with the handles until I got the PTO to turn. It now turns in the 540 and 1000 position but it also turns in the center position. Heres the kicker If I hold the PTO gear shaft and put it in gear I can actually hold the PTO with it running in 540 and 1000. As soon as I let go it begins to turn. When I hook up my Bushhog nothing happens. PTO appears to want to turn but nothing. I checked the shaft on the Bushog and it turns fine. I even checked it on my friends tractor. So any ideas on this one?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-08-2006, 07:53 Post: 130627
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5083
 PTO problem

I almost jumped up and down when I read you could hold the pto. Just what would happen if it did stop slipping?

Could the over running clutch not be engaging fully?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-08-2006, 14:31 Post: 130662
affordable



View my Photos

View my Photos  Pics
Join Date: Sep 2004
Location: Bellville,Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 93

2
Filter by User
 PTO problem

If everything on the inside is working properly, it has to be your PTO clutch disc.,either out of adjustment or it needs to be replaced.If you are going to test your PTO do not use your hand, we use a 2x4 and hold it against it while engaged.Let me know if we can help you with adjustment or parts

Tommy
Affordable Tractor Sales






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-10-2006, 17:49 Post: 130726
mscpilot



Join Date: Jul 2005
Location: Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 30

3
Filter by User
 PTO problem

Tommy, actually I did use a board at first but it was clear that there was no resisitance. Where is the PTO clutch disc? What does it look like? Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-10-2006, 17:53 Post: 130727
mscpilot



Join Date: Jul 2005
Location: Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 30

3
Filter by User
 PTO problem

KT, ,when I had the cover off the case the control unit that moves into the 540 and 1000 position, appeared to work fine, also the clutch at the front that engages the PTO appeared to work.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-10-2006, 21:48 Post: 130731
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853
 PTO problem

pilot! DOH! Never, ever hold a PTO shaft! All it takes is something to engage and zippo... Case in point I was 14 when on my dad's 1945 Farmall I did just that. I broke my thumb in 3 places and dislocated it---lucky I didn't rip it clean off---which I have also seen up-close and in person when a guy at work installed a big shaft nut---by hand---on a RUNNING 11-hp buffer/polisher---he lost his arm from just below the elbow. I was the guy who rode with him to the hospital! Ever see fresh, beef spare ribs? Picture that sticking out of your elbow!






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-10-2006, 23:19 Post: 130733
affordable



View my Photos

View my Photos  Pics
Join Date: Sep 2004
Location: Bellville,Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 93

2
Filter by User
 PTO problem

If you want to give me a call on Monday,I will try to help you resolve the problem,
Tommy
Affordable Tractor Sales






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Chinese Tractors -- Jinma Farmpro Agracat Forum

Thread 130618 Filter by Poster:
affordable 2 | earthwrks 1 | kthompson 1 | mscpilot 3 |




Most Viewed

+ Jinma Tractors Are They Worth It???
+ Jinma 284 Ammeter 30 Amp fuse keeps blowing
+ JAPANESE or CHINESE
+ Rebuild Yang Dong Y385 Tractor Engine Settings Man
+ Anyone use a Jinma chipper?
+ Jinma 224 Loader does not lift or tilt
+ Farm Pro 2420 won't start
+ Farm Pro 2425 4WD working?
+ Jinma 200 LE tractor dies will not start
+ SHould i buy a JInma

Most Discussion

+ New Chinese Tractors Board
+ Clutch for 354 Jinma
+ Jinma 200 LE tractor dies will
+ Jinma 284 Ammeter 30 Amp fuse
+ JAPANESE or CHINESE
+ Farm Pro 2420 won't start
+ Agracat Tractor
+ Jinma clutch does not disengag
+ Jinma Tractors Are They Worth
+ backblading snow

Newest Topics

+ jinma 284 has no power to anything
+ jinma 284 has no power to anything
+ Nortrac 254 will not start
+ Nortrac 254 will not start
+ fan and cooling
+ Jinma 254 Hydraulics foaming
+ farm pro support
+ Farmpro 2425 PTO slipping
+ Farmpro 2425 PTO slipping
+ Nortrac 254 won t Start







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines