Go Bottom Go Bottom

Imatch compatible

View my Photos
nmcjd4100
Join Date: Mar 2008
Posts: 5 up state NY Plattsburgh area
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-06-20          154718

i just bought a brand new jd 2520 replaced my 4100 i bout the imatch system to use with my finish mower and other 3 pt impoiment and it will not rais the mower the hook at the top keeps kicking the pin up and over on the mower the guid pin at the top of the 3 point on the mower is horse shoe shape and swivle up and down when you rais it up it start to pick the mower up then the top part flips up and out causing just the front of the mower to be picked up .
there must be another piece i can get to put on the mower to stop the guid from roleing over ? on the mower


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Imatch compatible

View my Photos
yooperpete
Join Date: Jan 2004
Posts: 1413 Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-06-20          154735

Sounds like the implement height position of the top link is just slightly to tall. Can you lower it on the mower? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Imatch compatible

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-06-20          154744

If you just got the I-Match coupler perhaps the dealer would trade it back for a brand with an adjustable height top hook such as a Land Pride and I'm sure other shortline brands have that feature too. Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login