Golden Jubilee pivot pin: Antique Tractor -- Ford  -- Antique Tractors Discussion Forum and Review Golden Jubilee pivot pin: Antique Tractor -- Ford -- Antique Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Antique Tractor -- Ford Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 09-28-2014, 08:29 Post: 191128
loafersglory



Join Date: Sep 2014
Location: United States
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4
 Golden Jubilee pivot pin

I am replacing the pivot pin on my Golden Jubilee tractor. The plate with three dimples was on the back side of the front support. It was secured with the pivot pin bolt and a larger bolt through bottom hole. This sandwiched the front support between the pivot pin flange and dimpled plate. Next was a spacer ring then the center axle. I believe the plate should be on front side of front support as indicated by welds. The I&T shop manual says to discard washers in front and back of the center axle. My plan was to weld the plate on front support and install the center axle on the pivot pin with no washers or spacers. Would this be correct? What are the holes on the spacer ring for? Thanks, Allen






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Antique Tractor -- Ford Forum

Thread 191128 Filter by Poster:
loafersglory 1 |




Most Viewed

+ Ford 2000 3 cyl gas
+ Ford 800 - 3pt lift issue - need advise
+ Ford 2000 tractor value
+ Ford 3000
+ Ford NAA wiring diagram
+ 1962 Ford Jubilee Stuck Clutch
+ Ford 850 Power steering Roll Bar add on how to
+ Ford 801 Value
+ Electrical problem with ford model 1920
+ Ford NAA Wiring Diagram

Most Discussion

+ Auto Manufacturer parts availa
+ Ford sell as is or RandR
+ Ford 850 Power steering Roll
+ Ford 800 - 3pt lift issue - ne
+ Ford 2000 tractor value
+ CONDENSER EATING FORD 600 ??
+ Need 2110 Rear Rim: 12x28 8 Lo
+ Ford 2000 3 cyl gas
+ Ford 1000
+ Ford 681 Select-O-Speed Questi

Newest Topics

+ Ford 3600 Hydraulic Lift problem
+ help no spark my ford 3000 won t start
+ 601Ford Hydraulics
+ replacing water pump on my ford 1510
+ Ford 1700 Loader Control Adapter
+ Ford 3000 Power Steering Cap Needed
+ Ford 681 Tractor 3ph will not lift
+ Ford 3000 Power Steering rigid lines
+ Golden Jubilee pivot pin
+ Golden Jubilee pivot pin







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines