Case 580E Stabilzer pin removal: Case  -- Other Tractor Brands Discussion Forum and Review Case 580E Stabilzer pin removal: Case -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Case Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 06-05-2015, 11:31 Post: 192895
Handiman



View my Photos

View my Photos  Pics
Join Date: May 2015
Location: Mantua, NEW Jersey
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 22
 Case 580E Stabilzer pin removal

After much trial and error the only way to remove a stuck pin is to burn it out using a torch. See the photo. First you have to cut the pin in 2 places to remove the cylinder using an 1/8 inch thick metal cutoff wheel with a skill saw. Then drill 3/8" holes through the 2 remaining sections of the pin. The holes allows the torch to blast away the metal. Even after burning to the edge of the pin I still needed a button hydraulic set between the two flanges to press out the burnt pieces. That tells me Case mfr. don't know engineering, because it shows too little clearance. The replacement pin was ground down .005 before insertion and grease fittings added. Shameful case people that refuse to talk to the people that use their stuff.






Link:   Picture of burnt pin 
Picture Link
Case: Case-580E-Stabilzer-pin-removal

Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 06-10-2015, 16:05 Post: 192923
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5094
 Case 580E Stabilzer pin removal

Reminds me of bucket pin on my mini Volvo. Pin broke and was able to drive out the broken pin but the damaged bushings had to be ground out with carbide bits. Were suppose to be able to drive them out also.
Only thing I can say is very fine steel surfaces that are joined for a while to another fine steel surface they seem to join. Not sure what it is called but it almost seems like the steel is a living item.

Then having worked for major heavy equipment manufacture for a few years it could be the pin was really over size or the bushings undersize of they did not line up as they should have and as we said "if it does not fit, get a bigger hammer" and I honestly saw some shafts there was no way to remove once they were driven in. When we saw such it was normally due to the two bushings not being in perfect alignment but they really do not want any slack in the none rotating part of the shafts either.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Case Forum

Thread 192895 Filter by Poster:
Handiman 1 | kthompson 1 |




Most Viewed

+ Case 446 hydraulic pump
+ Case 646 tractor
+ Cae IH 254 3 cyl. diesel 4 wd tractor
+ How much is my Case IH 245 worth on a trade in?
+ 2004 DX 33 ... worth a 2.5 hour drive?
+ case 530 CK
+ case 450b dozer
+ Case 1130
+ Case CX90 tractor review advice
+ 1070 Hydraulic Problem

Most Discussion

+ 2004 DX 33 ... worth a 2.5 hou
+ Case CX90 tractor review advic
+ Case 446 hydraulic pump
+ Contacting case tractor manufa
+ tractorless
+ Case DX24E Sputtering (same
+ Diesel oil in crankcase Case I
+ Case New Holland to Use Farmal
+ Box Blades
+ Won't Start - Help!

Newest Topics

+ 1070 Case Transmission Linkage
+ 1985 case ingersoll 446 hydraulics
+ bleed the steering
+ Case 580 Transmission disconnect switch - a better
+ Case IH 244 diesel does not turn off
+ Case 480B Construction King does not run
+ Case 580E Tachometer Runs backwards
+ Case 580E Stabilzer pin removal
+ Lower stabilizer pin rusted in
+ Contacting case tractor manufacturing













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines