WTK: Pinion/king pin shaft orientation on front drive CaseIH 275MFD: Case  -- Other Tractor Brands Discussion Forum and Review WTK: Pinion/king pin shaft orientation on front drive CaseIH 275MFD: Case -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Case Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 10-31-2009, 19:37 Post: 166639
nemein



Join Date: May 2009
Location: florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 10
 WTK: Pinion/king pin shaft orientation on front drive CaseIH 275MFD

I am in the process of installing new hubs on a Case IH 275 MFD 4 wheel drive tractor. My tractor was built by Mitsubishi and badged as a Case and use the same or very similar front drives.
My question concerns the pinion or king pin shaft that drives the front wheels, part #1962152C1. The splines on one end have a stop that prevents the gear from moving beyond a point on the shaft. The other end does not have this, the gear can move all the way to the bevel where the splines taper to the shaft toward the middle.
Should the end with the stop on the splines go to the top or to the bottom of the spindle.
I can send pictures if it helps and any help would be greatly appreciated.
Thank you in advance,
Mike






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Case Forum

Thread 166639 Filter by Poster:
nemein 1 |




Most Viewed

+ Case 446 hydraulic pump
+ Case 646 tractor
+ Cae IH 254 3 cyl. diesel 4 wd tractor
+ How much is my Case IH 245 worth on a trade in?
+ 2004 DX 33 ... worth a 2.5 hour drive?
+ case 530 CK
+ case 450b dozer
+ Case 1130
+ Case CX90 tractor review advice
+ 1070 Hydraulic Problem

Most Discussion

+ 2004 DX 33 ... worth a 2.5 hou
+ Case CX90 tractor review advic
+ Case 446 hydraulic pump
+ Contacting case tractor manufa
+ tractorless
+ Case DX24E Sputtering (same
+ Diesel oil in crankcase Case I
+ Case New Holland to Use Farmal
+ Box Blades
+ Won't Start - Help!

Newest Topics

+ 1070 Case Transmission Linkage
+ 1985 case ingersoll 446 hydraulics
+ bleed the steering
+ Case 580 Transmission disconnect switch - a better
+ Case IH 244 diesel does not turn off
+ Case 480B Construction King does not run
+ Case 580E Tachometer Runs backwards
+ Case 580E Stabilzer pin removal
+ Lower stabilizer pin rusted in
+ Contacting case tractor manufacturing













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines