Belarus clutch: Belarus  -- Other Tractor Brands Discussion Forum and Review Belarus clutch: Belarus -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Belarus Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-10-2013, 13:45 Post: 186910
stevewg



Join Date: May 2013
Location: Sharon, NH
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2
 Belarus clutch

I have a Belarus 532 4wd. the clutch will not disengage all the way. I have adjusted the linkage and seems to be right but transmission still turns. Can someone help?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 05-14-2013, 09:16 Post: 186963
kycat007



Join Date: May 2013
Location: Ky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5
 Belarus clutch


Steve
First make sure your PTO is out of gear.
If your clutch is adjusted to spec and the linkage is not flexing or bending the clutch may be froze to the flywheel.
Make sure you have the Free Travel, that inch or 2 the clutch goes down before it starts to release the clutch.

Your model I do not know exactly. Mine was not releasing.The Clutch plate was stuck to the flywheel.

Mine had a access plate in the area where you adjust the clutch. I did the same thing we used to do for old trucks.
Took the plate off
Had my wife push in the clutch
I placed a small cold chisel on the flywheel face so when I hit the chisel it would go between the clutch and flywheel. Hit the chisel a couple of solid blows. It made a dent in the clutch material bit no big deal. You may or may not see the clutch break loose from the flywheel.

With the tractor out of gear start the tractor and let it run for a couple of minutes. Push the clutch in and out a few times while you rev the engine up a little. If the chisel did not break it loose completly the centrifical torque should finish breaking it loose. Try shifting into one of your lower gears to see if the clutch is released.

If that did not do it I would try the chisel and run it one more time.

Last resort if the clutch still will not work. This last one is what I would do on my own tractor. Not recommending you do it but could work. I would start adjusting the clutch to increase the free travel (that inch or so the clutch pedal goes down before it starts to actually start doing anything to release the clutch. Increase the free travel a little (1/8-1/4 inch) at a time and test it.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Belarus Forum

Thread 186910 Filter by Poster:
kycat007 1 | stevewg 1 |




Most Viewed

+ Belarus Hydraulic Problem
+ Belarus 250 tractor - starts but will not move
+ Changed over to 12 volt alternator
+ Belarus 250AS engine problems.
+ Belarus 420AN Electrical Schematic
+ Belarus Tractor starter problems
+ To Belarus or not to Belarus ?
+ belarus 825
+ Belarus Tractor torgue for head bolts
+ 1990 Belarus 250 Questions and Introduction

Most Discussion

+ To Belarus or not to Belarus ?
+ Belarus Nortrac 250A diesel le
+ Belarus 250AS Tractor axle rep
+ Belarus 250 tractor - starts b
+ Belarus 250AS Steering Broke H
+ air in steering?
+ Found my one part and looiking
+ Belarus Tractor torgue for he
+ Belarus turns over won't start
+ 12 volt wiring

Newest Topics

+ Belarus 420A - Problems bleeding Injection Pump
+ Belarus 420A - Problems bleeding Injection Pump
+ 562 steering locked
+ Lubricants
+ 825 Belarus three point hitch INOP
+ Rear hydraulic outlet-settin up hydraulic top link
+ Leda T30a Belarus shifter questions
+ Leda T30a starting issues
+ belarus 400 shuts down after running
+ Belarus 250as blowby







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines