250 oil leak pushrod tubes?: Belarus  -- Other Tractor Brands Discussion Forum and Review 250 oil leak pushrod tubes?: Belarus -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Belarus Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 05-14-2008, 20:07 Post: 153698
belarus250



Join Date: May 2008
Location: NE
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 30
 250 oil leak pushrod tubes?

Can someone tell me how to replace the seals at each end of the tubes that contain the pushrods. I have a bad leak at the top and bottom of one pushrod tube on the rear cylinder. For some unknow reason the last person in put hose clamps on each end of the tubes in an attempt to perhaps hold the tubes up against the seals? The worst leak is the upper seal.
Sure would like to know how much I have to take apart to replace them. I hope it's just the rocker cover, rocker shaft and rockers and not the whole head on that cylinder.

The seals look brittle, I guess the heat beats them up good.
Thanks in advance for any help with this.
Ken






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 03-10-2009, 07:18 Post: 160938
vladimirec



Join Date: Mar 2009
Location: Croatia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 29
 250 oil leak pushrod tubes?

You have to remove head, after that it's simple. take out the tube and replace o-rings.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Belarus Forum

Thread 153698 Filter by Poster:
belarus250 1 | vladimirec 1 |




Most Viewed

+ Belarus Hydraulic Problem
+ Belarus 250 tractor - starts but will not move
+ Changed over to 12 volt alternator
+ Belarus 250AS engine problems.
+ Belarus 420AN Electrical Schematic
+ Belarus Tractor starter problems
+ To Belarus or not to Belarus ?
+ belarus 825
+ Belarus Tractor torgue for head bolts
+ 1990 Belarus 250 Questions and Introduction

Most Discussion

+ To Belarus or not to Belarus ?
+ Belarus Nortrac 250A diesel le
+ Belarus 250AS Tractor axle rep
+ Belarus 250 tractor - starts b
+ Belarus 250AS Steering Broke H
+ air in steering?
+ Found my one part and looiking
+ Belarus Tractor torgue for he
+ Belarus turns over won't start
+ 12 volt wiring

Newest Topics

+ Belarus 420A - Problems bleeding Injection Pump
+ Belarus 420A - Problems bleeding Injection Pump
+ 562 steering locked
+ Lubricants
+ 825 Belarus three point hitch INOP
+ Rear hydraulic outlet-settin up hydraulic top link
+ Leda T30a Belarus shifter questions
+ Leda T30a starting issues
+ belarus 400 shuts down after running
+ Belarus 250as blowby







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines